[WT-support] support Digest, Vol 45, Issue 5

[IZ4MJP Franco]

My answers <  >

Make sure your FTX-1 is in "VFO mode" not "Memory Mode" or "Memory Tune Mode" (see manual).
<Yes it is in VFO Mode. We dont'use Memory on HF or Memory Tune Mode>

VFO A should be highlighted in yellow in the Win-Test Band Map.
<Yes, as usual> VFO B in greyed if not in split

Does VFO B (SUB) track?
<No. If i press the "Split" button booth VFOs show the correct frequency but only once (when i press ALT + F1 o F2). If i turn the FTX-1 VFO the display in the Win-Test Band Map.doesn't change>

>>>>>> Yesterday night (Italy) a friend of mine lent me a FT-710 in order to understand if the problem reside in the FTX-1. Once connected to the same PC / same USB port Win Test  handled it right away without any issues with the same setup as the FTX-1 (same speed, FT-DX 101 radio, OFF/OFF, Poll 3000, etc. All functions are actives (Band and Mode Change, Split, etc.)

The second COM port supports FSK RTTY, CW, and PTT keying via DTR and RTS
<Thank you>

I hope this info could be usefull for the WT developers.


73, IZ4MJP Franco