[WT-support] support Digest, Vol 45, Issue 5

[Bob Wilson, N6TV]

Do not set Win-Test polling rate to 3000, use Auto.

Please send me your wt.ini file and .WT4 log file so I can check all
settings.

What do you see on Device Manager under Ports?  Send a screenshot.

Is the FTX-1 firmware up to date?

73,
Bob, N6TV

On Mon, Dec 15, 2025, 9:11 AM IZ4MJP Franco <franco at iz4mjp.com> wrote:

> My answers <  >
>
> Make sure your FTX-1 is in "VFO mode" not "Memory Mode" or "Memory Tune
> Mode" (see manual).
> <Yes it is in VFO Mode. We dont'use Memory on HF or Memory Tune Mode>
>
> VFO A should be highlighted in yellow in the Win-Test Band Map.
> <Yes, as usual> VFO B in greyed if not in split
>
> Does VFO B (SUB) track?
> <No. If i press the "Split" button booth VFOs show the correct frequency
> but only once (when i press ALT + F1 o F2). If i turn the FTX-1 VFO the
> display in the Win-Test Band Map.doesn't change>
>
> >>>>>> Yesterday night (Italy) a friend of mine lent me a FT-710 in order
> to understand if the problem reside in the FTX-1. Once connected to the
> same PC / same USB port Win Test  handled it right away without any issues
> with the same setup as the FTX-1 (same speed, FT-DX 101 radio, OFF/OFF,
> Poll 3000, etc. All functions are actives (Band and Mode Change, Split,
> etc.)
>
> The second COM port supports FSK RTTY, CW, and PTT keying via DTR and RTS
> <Thank you>
>
> I hope this info could be usefull for the WT developers.
>
>
> 73, IZ4MJP Franco
>
>
>
>
> --
> support mailing list
> support at win-test.com
> https://lists.win-test.com/cgi-bin/mailman/listinfo/support
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.win-test.com/pipermail/support/attachments/20251215/4d744055/attachment.htm>