[WT-support] doubled DX spots in local network

[OK1VWK]

Bob, in my opinion, network in subnet 10.10.10.0/28 means 
10.10.10.2-10.10.10.14 for hosts, 10.10.10.1 for gateway and 10.10.10.15 
for broadcast. 10.10.10.255 is valid for whole C range, which means 
10.10.10.0/24. Do you mean WT is not supporting IP subnets ?

vwk

Dne 6.11.2024 v 9:41 Bob Wilson, N6TV napsal(a):
> The broadcast address looks wrong.  If your two PCs are assigned 
> different IP addresses 10.10.10.x and 10.10.10.y, then broadcast 
> address should be set 10.10.10.255 in both copies of Win-Test and in 
> wtDxTelnet.
>
> 73,
> Bob, N6TV
>
> On Tue, Nov 5, 2024, 11:36 PM OK1VWK <ok1vwk at seznam.cz> wrote:
>
>     Bob, no LAN cable connected. Two Dell notebooks are used. Just
>     only single Wifi adapter is used for WLAN. Both connected to
>     single and same AP. Ocourse, WtDxTelnet is runnnig everytime on
>     single PC. Doesnt matter on which PC is WtDxTelnet running. On
>     this PC spots are OK. On second PC are doubled spots.
>
>     IP network is 10.10.10.0/28 <http://10.10.10.0/28>, broadcast
>     10.10.10.15
>
>     vwk
>
>     Dne 5.11.2024 v 21:22 Bob Wilson, N6TV napsal(a):
>>     Is there an Ethernet cable connected to either PC?  If so,
>>     please disconnect it from both PCs.  Of course, wtDxTelnet must
>>     only be started on ONE PC. Check the Windows taskbar or Windows
>>     Task Manager.
>>
>>     73,
>>     Bob, N6TV
>>
>>
>>     On Tue, Nov 5, 2024 at 12:16 PM OK1VWK <ok1vwk at seznam.cz> wrote:
>>
>>         Hi Bob,
>>
>>         Thanks for reply. Both PCs are connected trough a single
>>         2.4GHz WiFi adapter and the same AP. It is Teltonica LTE
>>         router. Both PCs are using only this network adapter. Doubled
>>         spots are everytime in PC where is not running WtDxtelnet. WT
>>         version 4.51.0, WtDxTelnet 3.8.0. Any next idea ?
>>
>>         GL de Milan, OL3R
>>
>>         Dne 5.11.2024 v 9:19 Bob Wilson, N6TV napsal(a):
>>>         Yes, this happens if both Wi-Fi and Ethernet are enabled on
>>>         one or more PCs.  Use one or the other, never both.
>>>
>>>         73,
>>>         Bob, N6TV
>>>
>>>         On Tue, Nov 5, 2024, 12:10 AM OK1VWK <ok1vwk at seznam.cz> wrote:
>>>
>>>             Hi all,
>>>
>>>             I am using WT on 2 PCs in local network. One uses Win7,
>>>             second Win 10. When I start WtDxtelnet, spots in DXC
>>>             monitor on second PC are doubled. On the PC where is
>>>             running WtDxtelnet is everythnig OK. Any idea why the
>>>             DXCluster traffic is doubling?
>>>
>>>             GL de Milan OL3R
>>>
>>>             -- 
>>>             support mailing list
>>>             support at win-test.com
>>>             https://lists.win-test.com/cgi-bin/mailman/listinfo/support
>>>
>>>
>>         -- 
>>         support mailing list
>>         support at win-test.com
>>         https://lists.win-test.com/cgi-bin/mailman/listinfo/support
>>
>>
>     -- 
>     support mailing list
>     support at win-test.com
>     https://lists.win-test.com/cgi-bin/mailman/listinfo/support
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.win-test.com/pipermail/support/attachments/20241106/f96c6b68/attachment.htm>