[WT-support] doubled DX spots in local network

[Bob Wilson, N6TV]

The broadcast address looks wrong.  If your two PCs are assigned different
IP addresses 10.10.10.x and 10.10.10.y, then broadcast address should be
set 10.10.10.255 in both copies of Win-Test and in wtDxTelnet.

73,
Bob, N6TV

On Tue, Nov 5, 2024, 11:36 PM OK1VWK <ok1vwk at seznam.cz> wrote:

> Bob, no LAN cable connected. Two Dell notebooks are used. Just only single
> Wifi adapter is used for WLAN. Both connected to single and same AP.
> Ocourse, WtDxTelnet is runnnig everytime on single PC. Doesnt matter on
> which PC is WtDxTelnet running. On this PC spots are OK. On second PC are
> doubled spots.
>
> IP network is 10.10.10.0/28, broadcast 10.10.10.15
>
> vwk
> Dne 5.11.2024 v 21:22 Bob Wilson, N6TV napsal(a):
>
> Is there an Ethernet cable connected to either PC?  If so,
> please disconnect it from both PCs.  Of course, wtDxTelnet must only be
> started on ONE PC.  Check the Windows taskbar or Windows Task Manager.
>
> 73,
> Bob, N6TV
>
>
> On Tue, Nov 5, 2024 at 12:16 PM OK1VWK <ok1vwk at seznam.cz> wrote:
>
>> Hi Bob,
>>
>> Thanks for reply. Both PCs are connected trough a single 2.4GHz WiFi
>> adapter and the same AP. It is Teltonica LTE router. Both PCs are using
>> only this network adapter. Doubled spots are everytime in PC where is not
>> running WtDxtelnet. WT version 4.51.0, WtDxTelnet 3.8.0. Any next idea ?
>>
>> GL de Milan, OL3R
>> Dne 5.11.2024 v 9:19 Bob Wilson, N6TV napsal(a):
>>
>> Yes, this happens if both Wi-Fi and Ethernet are enabled on one or more
>> PCs.  Use one or the other, never both.
>>
>> 73,
>> Bob, N6TV
>>
>> On Tue, Nov 5, 2024, 12:10 AM OK1VWK <ok1vwk at seznam.cz> wrote:
>>
>>> Hi all,
>>>
>>> I am using WT on 2 PCs in local network. One uses Win7, second Win 10.
>>> When I start WtDxtelnet, spots in DXC monitor on second PC are doubled. On
>>> the PC where is running WtDxtelnet is everythnig OK. Any idea why the
>>> DXCluster traffic is doubling?
>>>
>>> GL de Milan OL3R
>>> --
>>> support mailing list
>>> support at win-test.com
>>> https://lists.win-test.com/cgi-bin/mailman/listinfo/support
>>>
>>
>> --
>> support mailing list
>> support at win-test.com
>> https://lists.win-test.com/cgi-bin/mailman/listinfo/support
>>
>
> --
> support mailing list
> support at win-test.com
> https://lists.win-test.com/cgi-bin/mailman/listinfo/support
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.win-test.com/pipermail/support/attachments/20241106/b409c0bc/attachment-0001.htm>