[WT-support] doubled DX spots in local network

[Bob Wilson, N6TV]

Just try 10.0.0.255 port 9271 and tell me if that fixes the problem.  What
are the IP addresses of the two WT PCs?

73,
Bob, N6TV

On Wed, Nov 6, 2024, 12:33 PM OK1VWK <ok1vwk at seznam.cz> wrote:

> Bob, in my opinion, network in subnet 10.10.10.0/28 means
> 10.10.10.2-10.10.10.14 for hosts, 10.10.10.1 for gateway and 10.10.10.15
> for broadcast. 10.10.10.255 is valid for whole C range, which means
> 10.10.10.0/24. Do you mean WT is not supporting IP subnets ?
>
> vwk
> Dne 6.11.2024 v 9:41 Bob Wilson, N6TV napsal(a):
>
> The broadcast address looks wrong.  If your two PCs are assigned different
> IP addresses 10.10.10.x and 10.10.10.y, then broadcast address should be
> set 10.10.10.255 in both copies of Win-Test and in wtDxTelnet.
>
> 73,
> Bob, N6TV
>
> On Tue, Nov 5, 2024, 11:36 PM OK1VWK <ok1vwk at seznam.cz> wrote:
>
>> Bob, no LAN cable connected. Two Dell notebooks are used. Just only
>> single Wifi adapter is used for WLAN. Both connected to single and same AP.
>> Ocourse, WtDxTelnet is runnnig everytime on single PC. Doesnt matter on
>> which PC is WtDxTelnet running. On this PC spots are OK. On second PC are
>> doubled spots.
>>
>> IP network is 10.10.10.0/28, broadcast 10.10.10.15
>>
>> vwk
>> Dne 5.11.2024 v 21:22 Bob Wilson, N6TV napsal(a):
>>
>> Is there an Ethernet cable connected to either PC?  If so,
>> please disconnect it from both PCs.  Of course, wtDxTelnet must only be
>> started on ONE PC.  Check the Windows taskbar or Windows Task Manager.
>>
>> 73,
>> Bob, N6TV
>>
>>
>> On Tue, Nov 5, 2024 at 12:16 PM OK1VWK <ok1vwk at seznam.cz> wrote:
>>
>>> Hi Bob,
>>>
>>> Thanks for reply. Both PCs are connected trough a single 2.4GHz WiFi
>>> adapter and the same AP. It is Teltonica LTE router. Both PCs are using
>>> only this network adapter. Doubled spots are everytime in PC where is not
>>> running WtDxtelnet. WT version 4.51.0, WtDxTelnet 3.8.0. Any next idea ?
>>>
>>> GL de Milan, OL3R
>>> Dne 5.11.2024 v 9:19 Bob Wilson, N6TV napsal(a):
>>>
>>> Yes, this happens if both Wi-Fi and Ethernet are enabled on one or more
>>> PCs.  Use one or the other, never both.
>>>
>>> 73,
>>> Bob, N6TV
>>>
>>> On Tue, Nov 5, 2024, 12:10 AM OK1VWK <ok1vwk at seznam.cz> wrote:
>>>
>>>> Hi all,
>>>>
>>>> I am using WT on 2 PCs in local network. One uses Win7, second Win 10.
>>>> When I start WtDxtelnet, spots in DXC monitor on second PC are doubled. On
>>>> the PC where is running WtDxtelnet is everythnig OK. Any idea why the
>>>> DXCluster traffic is doubling?
>>>>
>>>> GL de Milan OL3R
>>>> --
>>>> support mailing list
>>>> support at win-test.com
>>>> https://lists.win-test.com/cgi-bin/mailman/listinfo/support
>>>>
>>>
>>> --
>>> support mailing list
>>> support at win-test.com
>>> https://lists.win-test.com/cgi-bin/mailman/listinfo/support
>>>
>>
>> --
>> support mailing list
>> support at win-test.com
>> https://lists.win-test.com/cgi-bin/mailman/listinfo/support
>>
>
> --
> support mailing list
> support at win-test.com
> https://lists.win-test.com/cgi-bin/mailman/listinfo/support
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.win-test.com/pipermail/support/attachments/20241106/a1a1083d/attachment-0001.htm>