[WT-support] Networking question
Gerard Jendraszkiewicz
jend at midway.uchicago.edu
Wed Apr 4 20:52:53 CEST 2007
Hi John,
Let me know what you find out also !
I have tried DHCP with 192.168.1.xxx, but had no joy with Win-Test. With
static IP 192.168.1.10x I was able to link all computers with WT ok.
Thanks
Jerry, KE9I
John Warburton G4IRN wrote:
> Scenario:
>
> I set up a network of 7 or 8 Win-Test laptops on a wireless network
> via a Wireless Access Point with 'DHCP Server' enabled.
> The router's IP start address for dynamic allocation is 192.168.0.100
> The WT laptops do NOT have static IP addresses, they have Dynamic
> allocation of IP configured.
> Ethernet is enabled on each laptop with the same broadcast address and
> port number. Each station number is different.
>
> What will the consequence be of not setting fixed IP addresses on the
> laptops? (yes, I know the manual states you should use a static address!)
>
> As far as I can work out, my router always allocates 192.168.0.* -
> will the network run quite happily?
>
> What if I need to reboot a laptop and it grabs a new unique IP
> address, within the 192.168.0.* range, on startup ?
>
> Am I inviting trouble if I do not set the IP addresses as FIXED?
>
> Thanks
>
> John G4IRN.
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>
More information about the support
mailing list