[WT-support] WT and Rotators
Jens Wagner
jens.wagner767 at gmail.com
Mon Nov 25 11:51:42 CET 2024
.. for me wtRotators works well using a K3NG rotor controler. Same as
PstRotator.
73s,
Jens/DH1AKY
Volker Debus <dl4zbg at darc.de> schrieb am Mo., 25. Nov. 2024, 08:02:
> Hello,
>
> have been using Win- Test for almost 20 years now… never got wt- rotator
> to work properly. My advice: use PstRotator instead.
>
> 73
>
> Volker
>
>
> DL4ZBG/DK0B
>
> > Am 25.11.2024 um 02:32 schrieb Lorenz Grassl <mailingliste2 at satellink.de
> >:
> >
> > Hi from Germany,
> >
> > a few weeks ago I participated in "Marconi-Contest VHF". Unfortunately I
> had troble to run my 2nd rotator with WT.
> >
> > Here´s my setup:
> > Radio 1 is a TS-850 (for all HF), radio 2 a FT-100 (for all VHF/UHF). I
> run two Yaesu G-1000 rotators - rotator one turns my hexbeam (HF), rotator
> 2 turns all VHF/UHF-antennas. Both rotators are controlled by one
> interface, the really perfect ERC-M by DF9GR. The interface requires only
> one COM-Port for both rotators. I run e.g. LOGGER32, which is able to
> control both rotators with this one interface. That means: in LOGGER32 I
> can use rotator one (radio 1) AND rotator two (radio 2) with the same
> COM-port. Unfortunately the rotator-control in WT is not that "up-to-date"
> or: "wt-rotators" is not able to have a case like this configured.
> >
> > Is there a chance that this will be possible with wt-rotators for the
> next contest-season in 2025? I´m sure I´m not the only one who has this
> conditions at his station. I asked this previously in March 2022 (18. and
> 20.) but there unfortunately was no response from the programmers. Maybe
> meanwhile there´s a change of mind concerning this?
> >
> > Best 73 de Lenz,
> > DL8RDL
> > --
> > support mailing list
> > support at win-test.com
> > https://lists.win-test.com/cgi-bin/mailman/listinfo/support
>
>
> --
> support mailing list
> support at win-test.com
> https://lists.win-test.com/cgi-bin/mailman/listinfo/support
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.win-test.com/pipermail/support/attachments/20241125/bdaf1ea1/attachment.htm>
More information about the support
mailing list