[WT-support] doubled DX spots in local network

[Bob Wilson, N6TV]

Is there an Ethernet cable connected to either PC?  If so,
please disconnect it from both PCs.  Of course, wtDxTelnet must only be
started on ONE PC.  Check the Windows taskbar or Windows Task Manager.

73,
Bob, N6TV


On Tue, Nov 5, 2024 at 12:16 PM OK1VWK <ok1vwk at seznam.cz> wrote:

> Hi Bob,
>
> Thanks for reply. Both PCs are connected trough a single 2.4GHz WiFi
> adapter and the same AP. It is Teltonica LTE router. Both PCs are using
> only this network adapter. Doubled spots are everytime in PC where is not
> running WtDxtelnet. WT version 4.51.0, WtDxTelnet 3.8.0. Any next idea ?
>
> GL de Milan, OL3R
> Dne 5.11.2024 v 9:19 Bob Wilson, N6TV napsal(a):
>
> Yes, this happens if both Wi-Fi and Ethernet are enabled on one or more
> PCs.  Use one or the other, never both.
>
> 73,
> Bob, N6TV
>
> On Tue, Nov 5, 2024, 12:10 AM OK1VWK <ok1vwk at seznam.cz> wrote:
>
>> Hi all,
>>
>> I am using WT on 2 PCs in local network. One uses Win7, second Win 10.
>> When I start WtDxtelnet, spots in DXC monitor on second PC are doubled. On
>> the PC where is running WtDxtelnet is everythnig OK. Any idea why the
>> DXCluster traffic is doubling?
>>
>> GL de Milan OL3R
>> --
>> support mailing list
>> support at win-test.com
>> https://lists.win-test.com/cgi-bin/mailman/listinfo/support
>>
>
> --
> support mailing list
> support at win-test.com
> https://lists.win-test.com/cgi-bin/mailman/listinfo/support
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.win-test.com/pipermail/support/attachments/20241105/0614abb4/attachment.htm>