[WT-support] Anyone using ICOM IC-7600?

[Björn Ekelund]

The microHAM virtual serial port driver will poll the radio even if you
disable it in Win-Test.
It does that as soon as it sees no other traffic on the CI-V bus.

I think it's shown in a different color so you should be able to tell which
commands
come from which source.

If there is no need for your keyer to know band, mode, etc. You can disable
this polling in
the settings of microHAM device router.

Björn SM7IUN

On Sun, Jan 22, 2023 at 11:53 PM Bernhard Buettner <dl6rai at posteo.de> wrote:

> I seem to have an issue controlling my "new" IC-7600 (built in ca. 2009)
> from Win-Test. Communication between WT and the radio is basically
> working - but when I tune the band with the VFO knob the frequency
> updates are rather slow and stuttering.
>
> I am using CI-V on the Win-Test side with 19200 baud. Firmware is
> version 2.00. Radio is also set to CI-V Transceive. I am using a
> microHAM MK2 controller where I selected the ICOM IC-7600, fw 2.00+
> driver. In the microHAM debug protocol I can see high amounts of polling
> and traffic going back and forth and "xx bytes waiting" messages.
>
> When I switch Win-Test to use the IC-Generic driver, things return to
> normal (instant frequency updates, no stuttering).
>
> Does anyone else have this issue?
>
> 73 Ben, DL6RAI
> --
> Bernhard Büttner
> dl6rai at posteo.de
> Obere Dorfstrasse 21, 86556 Stockensau, Germany
> +49 (0) 8257 9276757
>
> --
> support mailing list
> support at win-test.com
> https://lists.win-test.com/cgi-bin/mailman/listinfo/support
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.win-test.com/pipermail/support/attachments/20230126/f124fd5c/attachment.htm>