<div dir="ltr">The microHAM virtual serial port driver will poll the radio even if you disable it in Win-Test.<div>It does that as soon as it sees no other traffic on the CI-V bus.  <br><div><br></div><div>I think it's shown in a different color so you should be able to tell which commands </div><div>come from which source.  </div></div><div><br></div><div>If there is no need for your keyer to know band, mode, etc. You can disable this polling in </div><div>the settings of microHAM device router.</div><div><br></div><div>Björn SM7IUN</div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Sun, Jan 22, 2023 at 11:53 PM Bernhard Buettner <<a href="mailto:dl6rai@posteo.de">dl6rai@posteo.de</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">I seem to have an issue controlling my "new" IC-7600 (built in ca. 2009) <br>
from Win-Test. Communication between WT and the radio is basically <br>
working - but when I tune the band with the VFO knob the frequency <br>
updates are rather slow and stuttering.<br>
<br>
I am using CI-V on the Win-Test side with 19200 baud. Firmware is <br>
version 2.00. Radio is also set to CI-V Transceive. I am using a <br>
microHAM MK2 controller where I selected the ICOM IC-7600, fw 2.00+ <br>
driver. In the microHAM debug protocol I can see high amounts of polling <br>
and traffic going back and forth and "xx bytes waiting" messages.<br>
<br>
When I switch Win-Test to use the IC-Generic driver, things return to <br>
normal (instant frequency updates, no stuttering).<br>
<br>
Does anyone else have this issue?<br>
<br>
73 Ben, DL6RAI<br>
-- <br>
Bernhard Büttner<br>
<a href="mailto:dl6rai@posteo.de" target="_blank">dl6rai@posteo.de</a><br>
Obere Dorfstrasse 21, 86556 Stockensau, Germany<br>
+49 (0) 8257 9276757<br>
<br>
-- <br>
support mailing list<br>
<a href="mailto:support@win-test.com" target="_blank">support@win-test.com</a><br>
<a href="https://lists.win-test.com/cgi-bin/mailman/listinfo/support" rel="noreferrer" target="_blank">https://lists.win-test.com/cgi-bin/mailman/listinfo/support</a><br>
</blockquote></div>