[WT-support] TS-590 COM settings

[Jorge K]

Hi Harry:
Using a real RS232 I use 19200  N 1  DTR Handshake RTS always on  and Don´t poll 
unchecked. Put in menu 61 same baudrate. After changing baudrate turn transceiver 
off and on.
Using firmware 1.04.
73
Jorge LU5V V 



On 6 Jul 2011 at 10:30, Bob Wilson, N6TV wrote:

Hi Harry,

Are you using the Kenwood (HF) defaults, with DTR and RTS set to "Always OFF"?  
Are you also using a USB-to-Serial adapter instead of a "real" serial port? Some of 
these USB-to-Serial adapters may require DTR to be set to "Always ON". Try that.

Also in Win-Test, if the "Don't poll" checkbox is checked, UNCHECK it.

If neither of these things seems to help, you may have to try a different USB-to-
Serial adapter, preferably one based on the FTDI chipset rather than one based on 
the Prolific chipset. It is very hard to get USB-to-Serial adapters based on the 
Prolific chipset to work properly.

If you are using a microHAM virtual serial port, we'll need more details about how it 
is configured.

Another possibility is to try OmniRig for TS-590 support, rather than the support 
built-in to Win-Test.

PA2A's comment about firmware 1.04 is also somewhat troubling.

73,
Bob, N6TV

On Wed, Jul 6, 2011 at 10:07 AM, RA3AUU/P33W <ra3auu at srr.ru> wrote:
    Hi everyone,
    
    Trying to get Win-test working with TS-590 but not quite successful.
    
    Using 4800 8-N-2 at the Win-test side and 4800 at the radio side.
    
    The 590 follows Win-test commands (changing bands and modes, following
    cluster spots) but Win-test doesn't show any changes of the 590's
    frequency change.
    
    Any ideas ?
    
    73, Harry RA3AUU
    
    
    _______________________________________________
    Support mailing list
    support at win-test.com
    http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.win-test.com/pipermail/support/attachments/20110706/95d8af49/attachment.htm>