[WT-support] Radio 1 Window in WT4.5.0

[Bob Wilson, N6TV]

I don't recall seeing any reports like this before.

Are you using a USB-to-Serial adapter?  If so, and if that adapter is based
on the "Prolific" chipset, perhaps that is the problem.  These devices are
notoriously unreliable.  Perhaps new drivers will help, or a new
USB-to-Serial interface based on the FTDI chipset.

Also, what was happening on VFO B at the time?

I assume that you are using the Win-Test FT-1000MP defaults: 4800,N,8,2
DTR/RTS = Always OFF.

73,
Bob, N6TV

On Tue, Aug 17, 2010 at 11:06 AM, Armin Sturm <dk9py at t-online.de> wrote:

> Hi,
> I noticed a very strange behaviour in the VFO A frequency field of Radio 1
> (FT1000MP MarkV). During the contest I was wondering that the band suddenly
> changed in the working area from 20m to 15m (although the xcvr was still on
> 20m). The frequency shown in the VFO A field was something like 12405.?.
> Changing the band with the arrow keys worked still fine on the xcvr, but in
> the working field it jumped to 15m again. I only could stop the behaviour
> by
> closing WT and restart it again. It happend 3 times during the contest.
> Luckily I watched afterwords the VFO A field in the Radio window and the
> frequency on the radio to make sure that when it happens to restart WT.
> Hopefully WT did not log QSOs in the wrong band. Has this been seen before?
> I can remember that it happend also last year with WT3.27, but forgot to
> report.
> 73 / Armin, DK9PY
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.win-test.com/pipermail/support/attachments/20100817/93a77a1a/attachment.htm>