I don't recall seeing any reports like this before.<br><br>Are you using a USB-to-Serial adapter?  If so, and if that adapter is based on the "Prolific" chipset, perhaps that is the problem.  These devices are notoriously unreliable.  Perhaps new drivers will help, or a new USB-to-Serial interface based on the FTDI chipset.<br>

<br>Also, what was happening on VFO B at the time?<br><br>I assume that you are using the Win-Test FT-1000MP defaults: 4800,N,8,2 DTR/RTS = Always OFF.<br><br>73,<br>Bob, N6TV<br><br><div class="gmail_quote">On Tue, Aug 17, 2010 at 11:06 AM, Armin Sturm <span dir="ltr"><<a href="mailto:dk9py@t-online.de">dk9py@t-online.de</a>></span> wrote:<br>

<blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">Hi,<br>
I noticed a very strange behaviour in the VFO A frequency field of Radio 1<br>
(FT1000MP MarkV). During the contest I was wondering that the band suddenly<br>
changed in the working area from 20m to 15m (although the xcvr was still on<br>
20m). The frequency shown in the VFO A field was something like 12405.?.<br>
Changing the band with the arrow keys worked still fine on the xcvr, but in<br>
the working field it jumped to 15m again. I only could stop the behaviour by<br>
closing WT and restart it again. It happend 3 times during the contest.<br>
Luckily I watched afterwords the VFO A field in the Radio window and the<br>
frequency on the radio to make sure that when it happens to restart WT.<br>
Hopefully WT did not log QSOs in the wrong band. Has this been seen before?<br>
I can remember that it happend also last year with WT3.27, but forgot to<br>
report.<br>
73 / Armin, DK9PY<br></blockquote></div><br>