[WT-support] Update on Wintest and Cluster issue

[Martin]

Hi,
I had a simmilar problem on a fresh installed and patched (winupdate) 
Laptop (only Win XP was on this machine, firewall off). wtDxtelnet 
doesn't work.
I deinstalled Windows SP2 -> wtDxtelnet  is running with the same 
configuration I had before.
I installed SP2 again -> wtDxtelnet  is running.
There is a crazy behavour of Windows XP. Hope this helps.
Martin, OE1ILW

Andrew O'Brien schrieb:
> I have my firewall totally off at the moment.
>
>
>
> On Fri, Feb 29, 2008 at 2:18 PM, Juha Rantanen <oh6xx at sral.fi> wrote:
>   
>> Andy,
>>
>>  How is your Windows Firewall configured? Does it have an exception to
>>  allow wtDxtelnet? I put mine to web for you to check
>>  http://www.kolumbus.fi/oh6xx/Temp/wtdxtelnet.png
>>
>>  Juha OH6XX
>>
>>
>>
>>  Andrew O'Brien wrote:
>>  > Folks,
>>  >
>>  > my settings can be viewed at http://www.obriensweb.com/wtcluster.jpg
>>  >
>>  > On the PC that WT cluster works, I used the 127.255.255.255 settings
>>  > in both set-up areas.  Someone suggested I use the 198.XXX number but
>>  > I thought that would be only if networking PCs.  If 127.255.255.255
>>  > works on the non-ham PC, I assume it would work on the ham PC.  None
>>  > are networked other than sharing a Router for internet access.
>>  >
>>  >
>>  > Back to the office, will check back later.
>>  >
>>  >
>>  > Andy.
>>  >
>>  >
>>  >
>>  > On Fri, Feb 29, 2008 at 11:36 AM, Kenth Johansson <sm6dyk at telia.com> wrote:
>>  >> What is your settings in Wintest>options>configure interfaces? Have you enabled ethernet?
>>  >>
>>  >>  Kenth
>>  >>
>>  >>
>>  >>
>>  >>  ----- Original Message -----
>>  >>  From: "Andrew O'Brien" <andrewobrie at gmail.com>
>>  >>  To: <support at win-test.com>
>>  >>
>>  >>
>>  >> Sent: Friday, February 29, 2008 2:30 PM
>>  >>  Subject: Re: [WT-support] Update on Wintest and Cluster issue
>>  >>
>>  >>
>>  >>  Yes, I did that.  I am using the exact same settings  (as far as I can
>>  >>  see) that work successfully on the other PC in the house.
>>  >>
>>  >>  Andy.
>>  >>
>>  >>
>>  >>  On Fri, Feb 29, 2008 at 8:25 AM, Kenth Johansson <sm6dyk at telia.com> wrote:
>>  >>  > Andy,
>>  >>  >  In WtdxTelnet>Options>Win-Test communication network properties>You must uncheck the square: Disable communication with Win-Test. Have you done that?
>>  >>  >
>>  >>  >
>>  >>  >  Kenth
>>  >>  >  sm6dyk
>>  >>  >
>>  >>  >
>>  >>  >
>>  >>  >
>>  >>  >  ----- Original Message -----
>>  >>  >  From: "Andrew O'Brien" <andrewobrie at gmail.com>
>>  >>  >  To: <support at win-test.com>
>>  >>  >  Sent: Friday, February 29, 2008 1:26 PM
>>  >>  >  Subject: [WT-support] Update on Wintest and Cluster issue
>>  >>  >
>>  >>  >
>>  >>  >  > Well, since I installed Wintest last week , and enjoyed the software,
>>  >>  >  > I have been struggling trying to figure out why the DX Cluster does
>>  >>  >  > not work for me.  You will recall that I posted a message a few days
>>  >>  >  > ago that said I was able to get the Dx Cluster features to work on one
>>  >>  >  > PC, but not the one in the ham shack.  I suspected the problem might
>>  >>  >  > have been related to an odd situation that I discovered on my PC while
>>  >>  >  > trying to solve the cluster issue, my Windows Firewall service could
>>  >>  >  > not be started.  After several days of Google seraching , and several
>>  >>  >  > fix attempts, I finally solved the firewall issue and can now be
>>  >>  >  > certain that I have NO firewall in line.
>>  >>  >  >
>>  >>  >  > Despite all this, I am sad to report that the Win-Test DX Cluster
>>  >>  >  > issue remains. Telnet to the cluster works, but nothing shows up in
>>  >>  >  > the DX Cluster monitor window.  I even uninstalled and re-installed
>>  >>  >  > Wintest, still no luck.  Since it works fine on one PC and not the
>>  >>  >  > other, I assume it is not the software.  However, I my downlload an
>>  >>  >  > earlier version of Win-test rather than the beta release, see how that
>>  >>  >  > goes.
>>  >>  >  >
>>  >>  >  >
>>  >>  >  > --
>>  >>  >  > Andy K3UK
>>  >>  >  > www.obriensweb.com
>>  >>  >  > (QSL via N2RJ)
>>  >>  >  > _______________________________________________
>>  >>  >  > Support mailing list
>>  >>  >  > Support at win-test.com
>>  >>  >  > http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>>  >>  >  >
>>  >>  >
>>  >>  >  --
>>  >>  >  Jag använder gratisversionen av SPAMfighter för privata användare.
>>  >>  >   7244 spam har blivit blockerade hittills.
>>  >>  >   Betalande användare har inte detta meddelande i sin e-post.
>>  >>  >  Hämta gratis SPAMfighter här: http://www.spamfighter.com/lsv
>>  >>  >
>>  >>  >
>>  >>  >
>>  >>  >  _______________________________________________
>>  >>  >  Support mailing list
>>  >>  >  Support at win-test.com
>>  >>  >  http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>>  >>  >
>>  >>
>>  >>
>>  >>
>>  >>  --
>>  >>  Andy K3UK
>>  >>  www.obriensweb.com
>>  >>  (QSL via N2RJ)
>>  >>  _______________________________________________
>>  >>  Support mailing list
>>  >>  Support at win-test.com
>>  >>  http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>>  >>
>>  >>
>>  >>  --
>>  >>  Jag använder gratisversionen av SPAMfighter för privata användare.
>>  >>   7244 spam har blivit blockerade hittills.
>>  >>   Betalande användare har inte detta meddelande i sin e-post.
>>  >>  Hämta gratis SPAMfighter här: http://www.spamfighter.com/lsv
>>  >>
>>  >>
>>  >>
>>  >>  _______________________________________________
>>  >>  Support mailing list
>>  >>  Support at win-test.com
>>  >>  http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>>  >>
>>  >
>>  >
>>  >
>>
>>  _______________________________________________
>>  Support mailing list
>>  Support at win-test.com
>>  http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>>
>>     
>
>
>
>   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.win-test.com/pipermail/support/attachments/20080301/d594d555/attachment.htm>