[WT-support] Win-Test Trial version and Winkeyer Clone

[Stephan Schmieg]

Hi everyone,

unfortunately I experienced the same effect. Even worse, the keyer suddenly stopped working properly amid of the 10m contest last weekend. Whilst I was still able to do keying with the paddles and the built-in memory of the keyer, F-Key messages were not sent to the keyer. Restarting wintest, rebooting the PC, restarting the keyer, it all didnt solve the problem. With ucxlog and N1MM there‘s no such issue. I think about reverting to using the N6TV lua script for my IC-7300, but I‘d like to avoid it as it requires changing my setup every time i‘d like to do a contest.

Any ideas?

73

Stephan, DL6RDR

---
Gesendet über  Workspace ONE Boxer

Am 15. Dezember 2023 um 13:38:38 MEZ schrieb Klaus Göbel <kjgbl at posteo.de>:
Hi, 
I am using the Win-Test Trial version together with a Winkeyer Clone
based on an Arduino Nano with the K3NG-Firmware. Unfortunately, the
Keyer produces an audibly poor CW signal, especially at higher speeds
(30 WPM).
I have already described this problem here:
https://groups.io/g/radioartisan/topic/open_cw_keyer_mk2_with/103073610?p=,,,20,0,0,0::recentpostdate/sticky,,,20,2,0,103073610,previd%3D1702577149202704897,nextid%3D1699218429374864087&previd=1702577149202704897&nextid=1699218429374864087
I do not believe that my Keyer is causing the problem, as the Keyer
works correctly with the N1MM logger and also the K1EL test
application.
73 de Klaus, DL5AB
--  
support mailing list
support at win-test.com
https://lists.win-test.com/cgi-bin/mailman/listinfo/support
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.win-test.com/pipermail/support/attachments/20231215/380089ea/attachment.htm>