[WT-support] Win-Test 4.59.0-HQ released

[Óscar Luis]

Hi 
  
  
  
  
  Like every year, Win-Test 4.59.0-HQ is available here : 
  
  
  
  
  https://download.win-test.com/v4/hq/wt-4.59.0-HQ.exe 
  
  
  
  
  This special FREE version, reserved for the HQ teams, does not require 
any registration. 
  
  
  
  
  To prevent confusion with your current Win-Test setup, especially for 
operators who bring their laptops to a remote QTH, the exe is named 
wt-hq.exe, and the associated ini file is wt_hq.ini. You can copy the 
content of your current wt.ini to wt_hq.ini to keep the same configuration 
settings. 
  
  
  
  
  This version is compatible with the official 4.59.0, so you can mix them 
together on LAN and on WAN. 
  
  
  
  
  You must use wtTunnel (client) version 1.18.0 available here : 
  
  
  
  
  https://download.win-test.com/utils/wtTunnel-1.18.0.zip 
  
  
  
  
  The tunnel server hasn't changed : 
  
  
  
  
  https://www.win-test.com/hq05/tunnel/server/  (chose your flavor) 
  
  
  
  
  Usual reminders : 
  
  
  
  
  - One (and only one) wtTunnel (client) per LAN. 
  
  - To enable sync on the WAN, one WT must be set as BridgeHead in each LAN 
(Options / Interfaces / Network advanced settings). CAUTION : One 
bridgehead per LAN. As this log is used to sync LAN and WAN, I suggest to 
use a fast PC, and not assign it to a RUN position. 
  
  - The wtDxTelnet frames (packet cluster) are not forwarded on the tunnel. 
So, use one separate wtDxTelnet per LAN. 
  
  
  
  
  Good luck ! 
  
  
  
  
  73 
  
  
  
  
  Larry - F6FVY 
  
  
  
  
  --  
  
  support mailing list 
  
  support at win-test.com 
  
  https://lists.win-test.com/cgi-bin/mailman/listinfo/support
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.win-test.com/pipermail/support/attachments/20260909/018aaaaf/attachment.htm>