[WT-support] Win Test-K3 - Micro Keyer - Paddle - CW

[Michael DC8YZ]

Hi Laurent, At our club station, we use the following setup: Elecraft K3 
+ Micro Keyer II + Win Test + paddle connected to the Micro Keyer via a 
6.3mm jack. In Win Test, the Win Key chip is configured to display the 
CW speed as follows: *CW 30/24 WPM* Pressing ALT + F9 changes the first 
value (speed), which is the speed at which the logging program 
transmits. Turning the CW speed potentiometer on the Micro Keyer changes 
the second value. The speed displayed in the Micro Keyer matches the 
value shown in Win Test. My understanding is that this setup allows you 
to adjust the keying speed of the logging program and the speed when 
using the paddle separately. That's why it's displayed this way, giving 
you the option to control both independently. However, when I use the 
paddle, it doesn't key at 24 WPM, but with the same setting used for 
keying from the log program. While the two values ​​can be set 
separately, the first value always takes effect for both. Do you have 
any ideas? I think in the past this behaviour was not so, you could use 
different CW Speeds. Best Regards, Michael

-- 
## Please support and protect CW  _.-. .--  ## Support the RBN Network ##

take a look at my CW Skimmer Station in JN59MF

https://beta.reversebeacon.net/main.php?zoom=47.93,30.61,2.60&rows=100&max_age=10,minutes&spotter_call=DC8YZ&hide=distance_mi,mode,type

and spott other Stations on SSB

Mit freundlichen Grüßen

Michael Stark, DC8YZ
Member of     DARC OV B13
Member of the BAVARIAN CONTEST CLUB
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.win-test.com/pipermail/support/attachments/20260424/75b8c1b4/attachment.htm>