[WT-support] FTdx10 Support

[Bob Wilson, N6TV]

OmniRig does support the FTdx10 and it does use the VS; command to
determine active VFO.

73,
Bob, N6TV


On Fri, Jun 20, 2025 at 2:35 PM Dave Lawley <dave at g4buo.com> wrote:

> Hi Larry
>
> I understand the problem you have, thank you for taking a look.
>
> 73, Dave
>
> Sent from my iPhone
>
> > On 20 Jun 2025, at 22:26, Laurent HAAS - F6FVY <f6fvy at free.fr> wrote:
> >
> > Hi Dave
> >
> >> Le 20/06/2025 à 22:51, dave at g4buo.com a écrit :
> >>
> >> There is a problem with rig support for the Yaesu FTdx10. I couldn't
> find anything when I searched the archive of this support site.
> >> WT only follows VFO A for this radio. it will display the frequency for
> VFO B, but if I make VFO B the active VFO, WT stays stuck on the frequency
> of VFO A which is now not the active VFO.
> >
> > I assume you've set the radio to FTDX101 ?
> >
> > This code was written without having a radio so I could try it "for
> real", so it's quite possible that some features won't work.
> >
> > I can try to write some code, but there's no guarantee, because as I
> explained, without a radio it's a bit tricky to develop in these
> conditions. And especially that it works first time ;-)
> >
> > Otherwise, if you want it to work quickly, I suggest you use Omnirig (if
> it supports FTDX10 of course - I don't know if it does).
> >
> > 73
> >
> > Larry - F6FVY
> >
> > --
> >
> > Si vis pacem, para bellum - Végèce, Epitoma Rei Militaris
> >
> >
> > --
> > support mailing list
> > support at win-test.com
> > https://lists.win-test.com/cgi-bin/mailman/listinfo/support
>
>
> --
> support mailing list
> support at win-test.com
> https://lists.win-test.com/cgi-bin/mailman/listinfo/support
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.win-test.com/pipermail/support/attachments/20250620/34692b19/attachment-0001.htm>