[WT-support] FTdx10 Support

[Bob Wilson, N6TV]

Hi Dave,

Did you try making VFO B the active VFO by clicking inside the VFO B box at
the top of the bandmap window until it turns yellow?

[image: image.png]

I can't find any "Set Active VFO" commands in the LUA API so I do not see
any way to do the equivalent with a function key.

Win-Test would have to constantly poll the radio with the new *VS;* (VFO
Select) command to determine which VFO is selected, which could slow things
down.  The VS; command is not supported by the FT-991A and older Yaesu
radios, so it would require more work to support than you might think,
including adding support for the FT-710 and FTdx101.

73,
Bob, N6TV


On Fri, Jun 20, 2025 at 1:51 PM <dave at g4buo.com> wrote:

> Hi
>
> There is a problem with rig support for the Yaesu FTdx10. I couldn't find
> anything when I searched the archive of this support site.
>
> WT only follows VFO A for this radio. it will display the frequency for
> VFO B, but if I make VFO B the active VFO, WT stays stuck on the frequency
> of VFO A which is now not the active VFO.
>
> I've upgraded to the current version 4.56 but the problem persists.
>
> 73, Dave G4BUO
>
>
>
> --
> support mailing list
> support at win-test.com
> https://lists.win-test.com/cgi-bin/mailman/listinfo/support
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.win-test.com/pipermail/support/attachments/20250620/92d7cb68/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 4427 bytes
Desc: not available
URL: <http://lists.win-test.com/pipermail/support/attachments/20250620/92d7cb68/attachment.png>