[WT-support] Rotators

[Bob Wilson, N6TV]

Did you remember to manually set the broadcast address in wtRotators to
match the same as used by STN1 and STN2?  It cannot be set automatically.
Did you uncheck the Disable Communications box?

See
https://docs.win-test.com/wiki/Rotators#Configuring_wtRotators_.28multi-op_environment.29

73,
Bob, N6TV

On Fri, Nov 8, 2024, 6:24 AM Avondhu Radio Club <avondhuradioclub at gmail.com>
wrote:

> Good Day,
>
> Setting up a Multi-Single station for CQWW
> I have the PCs networked and this works for GAB, STN1 & STN2 frequency /
> band, logging etc.
>
> I configured the rotators and antennae for each band on STN1 and can
> control locally from from the small wtRotators controller window.
>
> Q.  Rotators Window, shows no info on STN1 or STN2.  The antenna list
> should be seen here?
>
> From the Wiki, I understand this is where STN2 should be able to control
> the beams individually.
>
> Gerard
> EI5KF
> --
> support mailing list
> support at win-test.com
> https://lists.win-test.com/cgi-bin/mailman/listinfo/support
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.win-test.com/pipermail/support/attachments/20241108/630c77b2/attachment.htm>