[WT-support] WT + Skimmer - Frequency jumps around

[Bob Wilson, N6TV]

No fix, if SDR is calibrated.  All spots, external or via local skimmer,
are at 100 Hz resolution only not 10 Hz, so you always have to retune a
little bit after clicking on a spot.

73,
Bob, N6TV

On Sun, Jun 2, 2024, 6:29 AM <chris at dg8dp.de> wrote:

> Hello,
>
>
>
> today I tried to set up WT + Skimmer + Telnet and everything works.
>
> When the skimmer decodes a CW station, it shows up on the band map, nice.
>
>
>
> But there is one point where I don't know how to proceed.
>
> I tune to a QRG with a CW station like 14.019.630, and the QRG is set to
> 14.019.600 by the software.
>
> This is not nice, because when tuning with the VFO, the QRG jumps around.
>
> It looks like the frequencies are rounded up or down to the nearest
> hundred Hz.
>
> If you click on a decoded skimmer station, the TRX is set to this
> frequency and jumps to the next hundred Hz.
>
>
>
> How can I fix this behaviour?
>
>
>
>
>
> Vy 73 de DG8DP
>
> Chris
>
>
>
> www.dg8dp.de
>
>
> --
> support mailing list
> support at win-test.com
> https://lists.win-test.com/cgi-bin/mailman/listinfo/support
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.win-test.com/pipermail/support/attachments/20240602/18b33267/attachment.htm>