[WT-support] Problems after Update to Version 4.50

[Michael Stark DC8YZ]

Thanks Kazunori and Alex,

i have tested with an old Windows 7 Computer, there is no problem....


73 viel Spass beim gemeinsamen Hobby

Mit freundlichen Grüßen

Michael Stark, DC8YZ

Member of the DARC B13 (Roth-Schwabach)
Member of the BAVARIAN CONTEST CLUB

Am 18.12.2023 um 18:13 schrieb Alex Savushkin:
> I have a similar problem.
>
> --
> Sent from iPad
>
> 18.12.2023, 18:15, "Kazunori Watanabe" <mj0cfw at gmail.com>:
>
>     Hello Michael and Laurent,
>
>     I have same problem so uninstall 4.50 then back to 4.49
>     Same as Michael described, my laptop PC is not always connected to
>     USB-Serial devices so click error window default button on middle
>     “disable it for this session” then Win-Test crashes.
>
>     Both Windows 10 Home and Windows 11 Home edition.
>
>     73 Kazu
>     M0CFW, JK3GAD
>
>
>          On 18 Dec 2023, at 14:30, Michael DC8YZ <dc8yz at darc.de> wrote:
>
>          Hello Laurent, For me it is the case that I don't have a
>         permanent PC to which the radio devices with their COM ports
>         are permanently connected.
>
>          A total of 4 Com ports are set up
>
>          I use my laptop to connect various radios. I have a Yaesu
>         FT-991 at home and an Icom 7300 at my QTH.
>
>          However, both radios are configured in the Com Port Setup.
>         However, sometimes one and sometimes the other TRX is connected...
>
>          There are also situations where I don't have a radio
>         connected to my laptop and I just set up a contest that will
>         take place in a few days.
>
>          I will also test version 4.50 on a PC to see if the problems
>         also occur.
>
>          I also look at what happens when a radio is connected.
>
>          Not that it's another problem...
>
>          Maybe a couple of OMs could also recreate this problem. What
>         happens if no TRX is connected an Com Ports are not disabled.
>
>          Thanks Michael
>
>
>
>
>
>          Mit freundlichen Grüßen
>
>          Michael Stark, DC8YZ
>          Member of DARC OV B13
>          Member of the BAVARIAN CONTEST CLUB
>          Am 18.12.2023 um 14:56 schrieb Laurent HAAS - F6FVY:
>
>              If there is no radio connected to the COM6 (that can't be
>             opened apparently), better disable it (totally, if it
>             doesn't exist at all - check the device manager). If the
>             COM6 still exists, but is not used, just disable its use
>             in the interface setup dialog before opening the log.
>
>              Olivier added the serial-over-telnet capability to the
>             interfaces and rewrote some portions of the serial code
>             for that. Maybe it's interfering with your current setup,
>             despite I didn't notice anything on the various
>             installations I dealt with since 4.50.0 is out ?
>
>          --
>          support mailing list
>         support at win-test.com
>         https://lists.win-test.com/cgi-bin/mailman/listinfo/support
>
>
>
>     -- 
>     support mailing list
>     support at win-test.com
>     https://lists.win-test.com/cgi-bin/mailman/listinfo/support
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.win-test.com/pipermail/support/attachments/20231218/ceb1ec71/attachment-0001.htm>