[WT-support] Contest-Recorder Win-Test

[Bob Wilson, N6TV]

Run *mmsys.cpl* and make sure the microHAM devices are not being used as
the Windows default for Playback and Recording (you do NOT want the green
checkmark on the microHAM devices, if possible; they should be your
built-in PC sound card).

Also make sure your Privacy settings have not been changed (by a Windows
update)?

With no applications like Win-Test running:

   1.

   Right click on Window logo, lower left corner
   2.

   Select Settings
   3.

   Click on Privacy
   4.

   Click on Microphone

Turn on the Allow apps to access your microphone toggle switch.

73,
Bob, N6TV


On Thu, Nov 25, 2021 at 9:26 AM Stefan Muhl <dj8wk at darc.de> wrote:

> Hello everybody,
>
>
>
> actually I’m struggeling with the contest-recorder in Win-Test.
>
>
>
> I use an elder Version of WT which is V 4.27.0, radio is an IC-7700
> connected to a Notebook Win 10 by using a Micro Keyer II, router V 9.0.4
>
>
>
> The recorder worked properly during WAE SSB, did a good job in WAG and in
> Marconi-Contest (which I did by using a Kenwood TS-870).
> After returning to my standard rig IC-7700 I don’t manage to have a signal
> to be recorded. I used saved preset settings of my Icom and everything is
> working fine except the recorder. When starting it the LED „line“ of the MK
> II lights red as it should, *but I miss the light of the yellow LED „sc“
> showing that the sound-card of MK II is used and activated*. MP3 in WT
> setting shows „line microham codec“.
>
>
>
> All settings should be the same as they were used during WAE and WAG but
> anyway, I cannot record rx signals.
>
>
>
> Anybody out there who can tell me where to look or what to try to get the
> recorder back in service!?
>
>
>
> 73s
>
> Stefan, DJ8WK
>
>
>
>
>
> Gesendet von Mail <https://go.microsoft.com/fwlink/?LinkId=550986> für
> Windows 10
>
>
> _______________________________________________
> Support mailing list
> support at win-test.com
> http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.win-test.com/pipermail/support/attachments/20211125/adc62bbb/attachment.htm>