[WT-support] CW WITH LPT1 WINDOWS 10

[Bob Wilson, N6TV]

Win10 Pro 32 bits is very rare.  Are you sure it is not Win10 Pro 64 bit?
See https://www.engadget.com/windows-10-32-bit-oem-173055990.html .

When you installed the latest version (?) of Win-Test on Windows 10, did
you remember to select "Run as Administrator" to run the FULL installer
(not just the update)?

http://download.win-test.com/v4/bin/wt-4.37.0.exe


And after you ran the installer, Test, did you change the *Properties* of
wt.exe to "Run as Administrator"?

Both steps are strongly recommended.

You will also need dlportio.dll or (inpout32.dll renamed) in the Win-Test
installation folder.  The full installer should do this otherwise you
should get some error message if the LPT box is checked.

Older instructions here:
http://lists.f5mzn.org/pipermail/support/2011-May/081094.html

Finally, did you open an SSB log or a CW log?  Is the rig in CW mode and
does this mode show up in Win-Test?  Type REOPEN [Enter] to view the log
mode.  SSB logs generate no CW.

What rig are you using?  Many modern rigs support CW and PTT keying by
virtual DTR and RTS pins over USB cable, so you don't need LPT any more.
See my presentation on this:

   - Everything You Need to Know About USB and Serial Interfaces
   <https://bit.ly/USBserial2021>, updated for 2021

Slide 50 and following explains keying via COM port and lists which radios
support it, and how to enable it.

73,
Bob, N6TV


On Tue, Jul 20, 2021 at 4:31 PM NOEL POULIN <noelhqnsu at globetrotter.net>
wrote:

> Hello
>
> I am trying to make my LPT1 port working in cw with a new WIN 10 PRO
>
> It is working perfectly with Win7 and XP
>
> With my new WIN10 PRO, no joy...
>
> I put the same settings in LPT windows of Wintest
>
> Port adr  (hex)  378
>
> CW and PTT    checked
>
> Active radio 1 checked.
>
> I also checked the properties on the lpt1 port in the device
> manager....THE PORT address is also 378
>
> Wonder if the LPT1 is realy working with win 10 pro...32 bits..
>
> It realy works well with Win7 and XP PRO/
>
> What could be wrong??
>
> Thanks
>
> Noel
>
>
>
> _______________________________________________
> Support mailing list
> support at win-test.com
> http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.win-test.com/pipermail/support/attachments/20210720/308e3d8d/attachment.htm>