[WT-support] Scripts for 2R

[Bob Wilson, N6TV]

You can program Win-Test for Radio 1 = FT1000MP, Radio 2 = FTdx101, and
use Advanced SO2R mode.  But since the two radios use very different
command sets, *my Yaesu LUA scripts <https://bit.ly/wtscripts>* would have
to be merged together to handle this configuration, and that's a big job.
It was already done once, to support two different Icom radios.

The easiest solution is to use two networked PCs, one per radio.  Then
install FT1000scripts.zip
<https://www.kkn.net/~n6tv/wtscripts/FT1000scripts.zip> scripts on the
first PC and YaesuScripts.zip
<https://www.kkn.net/~n6tv/wtscripts/YaesuScripts.zip> on the second PC.
Note:  the Yaesu scripts may require some updates to fully support the
FTdx101 for commands that are not compatible with the FTdx5000 and the
others that are listed as supported.

73,
Bob, N6TV


On Sat, Feb 6, 2021 at 10:10 AM HA3LN <list at ha3ln.hu> wrote:

> Hi,
>
> I'm wondering whether is there any opportunity to setup scripts with the
> same WT instance to control two different radios?
> I use FT1000MP and FT101D and might be great to have to capability for
> both radios.
>
> I guess as the commands are different for these two types it should be
> working anyways. Just might be good not to cause unnecessary traffic to
> the "other" one and address the command to the proper radio.
>
>
> Thanks in advance.
>
> 73!
> Csaba  HA3LN / HG3N
> _______________________________________________
> Support mailing list
> support at win-test.com
> http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.win-test.com/pipermail/support/attachments/20210206/f4c9b2e2/attachment.htm>