[WT-support] Voice keyer transmits, hardware blinks but no output on SSB (CW - OK)

[Anton Koval, MW0EDX]

Thanks Bob,

The SSB bar graph is also not reacting...Neither while recording via Shift+1F1 or while playing F1...

I will try RTS/DTR thing.

Just wanted to do the DARC contest this Sunday.

 
Anton Koval
m0edx at yahoo.com




On Friday, 10 January 2014, 18:19, "Bob Wilson, N6TV" <n6tv at arrl.net> wrote:
 
If the PTT or "TX" LED on the RigExpert is properly lit for the duration of the F1 message, and the PTT cable is properly connected between the RigExpert and the radio, but the radio does not go into TX, then either the RigExpert or the cable is defective.
If the LED is *not* lighting, in Win-Test SETUP dialog, set COM7 to "Other device" and set either RTS or DTR to "PTT" (click Properties).
73,
Bob, N6TV
On Jan 10, 2014 9:51 AM, "Anton Koval, MW0EDX" <m0edx at yahoo.com> wrote:

Folks,
>
>
>I have been re-arranging the shack. That included changing the COM ports on my PC (do not ask WHY :-)).
>
>
>I was able to set the COM ports to run Win-Test properly, change bands, auto-CQ on CW but NOT on SSB.
>
>
>When recording F1 (example - CQ) on SSB and then playing F1 the hardware (Rig Expert) is blinking, but the TX is not switching to transmit. Also when hitting the TX button on TX while F1 is playing nothing is also heard.
>
>
>Equipment:
>
>
>- IC7800, Steppir DB18E, RigExpert
>- Rig Expert's ports: 4-Rig Experts standard Serial Port, 5- Rig Experts standard FSK Port, 6-Rig Experts standard CAT Port, 7 - PTT/CW Port
>
>
>What I am missing now ? Before the change (see above) all was working fine...
>
>
>Thanks,
>
>
>
>
> 
>Anton Koval
>m0edx at yahoo.com
>
>_______________________________________________
>Support mailing list
>support at win-test.com
>http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support
>
>

_______________________________________________
Support mailing list
support at win-test.com
http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.win-test.com/pipermail/support/attachments/20140110/347e1fb1/attachment.htm>