[WT-support] Error opening UDP socket 10013

[Christoph RHEKER]

Hello,

when adding keys in the registry, please note that they are CASE SENSITIVE!

“xyz” is not the same as “XYZ” ..


73
Christoph DL4YAO 

From: dl2alf 
Sent: Tuesday, January 07, 2014 6:17 PM
To: support at win-test.com 
Subject: Re: [WT-support] Error opening UDP socket 10013

Hi Andreas,

this is exactly the same situation as described here http://lists.f5mzn.org/pipermail/support/2009-December/079147.html and in the FAQ (as you mentioned already).

Did you really check the registry value and value as described?
If so, was it set to 1?
If so, did you set it to 0 properly?
If so, did you reboot your machine?
If so, please re-check the registry key.
If so, was is set to 1 again?

If so, some other programm was changing the value automatically. 
Although this hasn't been confrimed yet, some 3rd party firewall or ant-virus software may have changed the value to prevent port hijacking.
Try to find out which prorgam caused the problem by systematically deinstall such software and check again.

If you cannot find the registry key then try to generate a key and set the value to 0 as described.

@Pete: sorry, but I've never heard, that Microsoft changed its behavoir in that case from SPx to SPy.
Unfortunately I do not have a test system ready to confrim this.

Hope that helps!

73 de Frank, DL2ALF



------------------------------------------------------------------------------
  Von: support-bounces at f5mzn.org [mailto:support-bounces at f5mzn.org] Im Auftrag von Andreas Winter
  Gesendet: Dienstag, 7. Januar 2014 17:22
  An: support at win-test.com
  Betreff: Re: [WT-support] Error opening UDP socket 10013


  Pete,

   

  probably not. I have to check. Concerning your questions I assume it is important to have SP3 (?).

   

  73

   

  Andreas

   

  Von: support-bounces at f5mzn.org [mailto:support-bounces at f5mzn.org] Im Auftrag von Pete Smith N4ZR
  Gesendet: Dienstag, 7. Januar 2014 16:44
  An: support at win-test.com
  Betreff: Re: [WT-support] Error opening UDP socket 10013

   

  Andreas, did you bring all of those computers up to SP3?



73, Pete N4ZRCheck out the Reverse Beacon Network at http://reversebeacon.net, blog at reversebeacon.blogspot.com.For spots, please go to your favorite ARC V6 or VE7CC DX cluster node.On 1/7/2014 8:15 AM, Andreas Winter wrote:

    Hello,

     

    Recently I got some “new” used computers, which have been fresh installed with Microsoft XP. If I start WT and WtDxTelnet on the same machine I get the error message “Error opening UDP socket #10013”. The error message appears by starting the second program (WT or WtDxTelnet, depending was has been started before).

     

    I checked against two computers with Win7, were this behavior is not the case. 

    I never have seen this behavior on the old machines with Win2000 before either.

     

    I did a search:

     

    http://lists.f5mzn.org/pipermail/support/2008-July/075954.html

     

    http://lists.f5mzn.org/pipermail/support/2009-November/078872.html

     

    http://docs.win-test.com/wiki/FAQ:Networking

     

    However the computers have been fresh installed and there is not much other software than WT on the (XP) computers, because they are purely dedicated to contesting.

     

    The problem seems to be Microsoft XP related. Any chance to get this working? Any help is appreciated.

     

    73

     

    Andreas, DK4WA

     






_______________________________________________Support mailing listsupport at win-test.comhttp://lists.f5mzn.org/cgi-bin/mailman/listinfo/support 



--------------------------------------------------------------------------------
_______________________________________________
Support mailing list
support at win-test.com
http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.win-test.com/pipermail/support/attachments/20140107/8b765c1f/attachment.htm>