[WT-support] SO2R Question

[Bob Wilson, N6TV]

Are you using a micro2R or are MK2R+?  They don't work the same with
Win-Test.  With the MK2R+, Win-Test has more control.  It sounds like you
are using a micro2R (aka U2R).

With the micro2R in AUTO, headphone switching is controlled according to
the programming defined in the Router's Audio Tab, Headphones section, not
by Win-Test (unless Win-Test activates stereo mode).

With the micro2R, one thing that can help put Win-Test in control is to *
disconnect* the PTT OUT line from the back of each radio, and instead
connect these PTT lines directly to your amplifiers, bypassing PTT control
via the MK2R+.  I also recommend using "Classic" Auto control under the
SO2R tab so that Win-Test doesn't send any PTT commands via the microHAM
control protocol.  Otherwise, whenever the micro2R detects
computer-generated PTT, it overrides the headphone switching that Win-Test
wants to do.

73,
Bob, N6TV

On Sat, Jul 27, 2013 at 10:52 AM, Matthias Jelen <Matthias.Jelen at gmx.de>wrote:

> Hello contesters,
>
> I have a question to the SO2R experts:
>
> I am struggling to get the scenario switching from within Win-Test to work
> properly. I think it worked once, but at the moment I feel that the
> settings from the Microham Routers Function Tab override the settings from
> Win-Test.
>
> Changing radios with *, switching between "Primary Radio", "Secondary
> Radio" and "Both" work as desired.
>
> I can see the appropriate commands going to the MK2R when I monitor the
> control port with the router.
>
> Setup was done according to the pages in the Win-Test wiki. I can find a
> remark there that the settings in the functions tab are overridden from
> Win-Test, but this doesn´t seem to be the case.
>
> Can anybody please give me a hint how I can switch between the settings
> done in the Microham Routers functions tab and the scenarios in Win-Test?
>
> Thanks a lot & 73,
>
> Matthias, DK4YJ (@DQ4W)
>
>
>
> _______________________________________________
> Support mailing list
> support at win-test.com
> http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.win-test.com/pipermail/support/attachments/20130727/f7ce058b/attachment.htm>