[WT-support] R: problem comunication WT via micoHAM USB III -IC7700

[Luca NCJ]

Be carefull!!

 

If you are using 2 radio of same model MH router WANTS a different address
from default address so one of the 2 radios needs to be resetted with a
different address (the one you can read into Microham router)

Maybe this is the case
. 

 

  _____  

Da: support-bounces at win-test.com [mailto:support-bounces at win-test.com] Per
conto di Tõnno Vähk
Inviato: martedì 26 ottobre 2010 11.21
A: support at win-test.com
Oggetto: Re: [WT-support] problem comunication WT via micoHAM USB III
-IC7700

 

Actually ES5RY was having problem to get IC756 PROIII CAT to work. USB
Router shows frequency and everything is fine but Win-Test does not read
CAT.

 

He used MK2R+ and settings:

 

19200, 8, N, 1. Address 50h. No settings in WT worked (CI-V on/off,
handshake, always on/off, tried 4800 rate in the rig and USB router
)

 

Any idea why WT might not read CAT while all fine in USB router? (same port
of course and USB router says port opened)

 

Can it be the problem of the address? Is 50h correct for PRO III?

 

73

Es5tv

 

From: support-bounces at win-test.com [mailto:support-bounces at win-test.com] On
Behalf Of Bob Wilson, N6TV
Sent: Tuesday, October 26, 2010 12:13 PM
To: support at win-test.com
Subject: Re: [WT-support] problem comunication WT via micoHAM USB III
-IC7700

 

On Mon, Oct 25, 2010 at 9:44 PM, sp7idx <sp7idx at interia.pl> wrote:

 CI-V Baud Rate 19200
CI-V Address 7Ah   <<<<<<<<<<<<<
CI-V Transceive ON
Decode Baud Rate 19200

 

After several private messages back and forth, I finally noticed that this
not the default CI-V  address for an IC-7700.

 

Waldi changed the CI-V address back the default, 74h, then Win-Test worked
fine.

 

73,

Bob, N6TV

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.win-test.com/pipermail/support/attachments/20101026/d96113b9/attachment.htm>