[WT-support] Win-test/MMTTY/RADIO

[Douglas Maxwell]

Hi Ozer,
    WinTest is using Com5 for rig control therefore MMTTY can't use it. >From what I understand, the rigblaster would have to be assigned to a separate comms port (com6?) to allow PTT/FSK.

When using MMTTY alone, MMTTY can snoop rig control to provide PTT, but when using MMTTY in conjunction with WinTest only WinTest can see the rig. I think MMTTY needs to use a separate comms port for PTT/FSK.

CW and SSB work because you do not need WinTest to run in conjunction with MMTTY.

I am having problems myself, but hopefully someone else can confirm if the above is true or not.

Doug GM0ELP

  ----- Original Message ----- 
  From: özer öksüz 
  To: support at win-test.com 
  Sent: Monday, January 05, 2009 12:16 PM
  Subject: Re: [WT-support] Win-test/MMTTY/RADIO


  Hi Doug

  Rig control port is Com5 for Wintest/Rigblaster/Kenwood.When I install the USB adapteur between PC and Rigblaster plus,this port is activated.And no problem for SSB,
  CW and MMTTY only operation.

  I don't understand how will use MMTTY/Wintest together...Which Com port for MMTTY?

  Ozer






   
  2009/1/5 Douglas Maxwell <douglas.maxwell at virgin.net>

    Hi Ozer,

        From what I've found out so far, there seems to be 2 requirements:
    1) MMTTY requires FSK and PTT on the same port.
    2) MMTTY requires a separate port from the rig control port that WinTest ties up.

    Doug GM0ELP 
      ----- Original Message ----- 
      From: özer öksüz 
      To: support at win-test.com 
      Sent: Monday, January 05, 2009 11:46 AM
      Subject: [WT-support] Win-test/MMTTY/RADIO


      Hello!

      I have also same problem:

      I am using a Rigblaster plus radio interface between Kenwood 870 and laptop.Contest software is Win-test,of course...
      There is not any problem when I am using SSB or CW.
      Also no problem on MMTTY only.
      When I try Win-test and MMTTY together,Win-test works correctly on screen but Rigblaster and Kenwood don't TX.

      Any comment or idea for solution?
      Thank you!

      Ozer,TA2RC



      -- 
      Ozer Oksuz,TA2RC,YM0T
      www.ym0t.com



--------------------------------------------------------------------------


      _______________________________________________
      Support mailing list
      Support at win-test.com
      http://www.f5mzn.org/cgi-bin/mailman/listinfo/support



--------------------------------------------------------------------------



      No virus found in this incoming message.
      Checked by AVG - http://www.avg.com 
      Version: 8.0.176 / Virus Database: 270.10.2/1873 - Release Date: 1/3/2009 14:14






    _______________________________________________
    Support mailing list
    Support at win-test.com
    http://www.f5mzn.org/cgi-bin/mailman/listinfo/support





  -- 
  Ozer Oksuz,TA2RC,YM0T
  www.ym0t.com



------------------------------------------------------------------------------


  _______________________________________________
  Support mailing list
  Support at win-test.com
  http://www.f5mzn.org/cgi-bin/mailman/listinfo/support



------------------------------------------------------------------------------



  No virus found in this incoming message.
  Checked by AVG - http://www.avg.com 
  Version: 8.0.176 / Virus Database: 270.10.2/1873 - Release Date: 1/3/2009 14:14
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.win-test.com/pipermail/support/attachments/20090105/7081be84/attachment.htm>