[WT-support] Splits on 40

[Bob Wilson, N6TV]

OK good, you told us everything we need to know for a bug report, except the
version of Win-Test that you are using.

73,
Bob, N6TV

2008/10/26 Robert Pack, NX5M <nx5m at txcyber.com>

>  Let me rephrase this.  Bear with me....I am a little tired eventhough
> this weekends CQWW effort was not a serious one.
>
> If the 1000D is not set to split, click on the first spot (*DR1A for
> example) all is well.  Main VFO goes to his transmit frequency and sub VFO
> goes to his listening frequency and split is all set up and ready to go.
>
> If the 1000D is still set up on split after clicking *DR1A, and I click on
> another *type spot like *CT9P, the radio remains on the frequency that DR1A
> was transmitting on while the sub VFO moves to the correct listening
> frequency for CT9P.  It does not change and stay on the transmit frequency
> of CT9P.
>
> If, in between the above two examples, I were to turn the split off on the
> 1000D manually after clicking the DR1A spot, when I click on the CT9P spot
> it works as it should.  And if I were to click on a spot that does not have
> a split after clicking on DR1A, the radio exits split and works normally.
> If after that I click on the CT9P spot, all works as it should.
>
> I just cannot go from one split frequency spot to another split frequency
> spot....the radio does not go to the next split frequency set.
> Let me just say that:
> DR1A tx on 7077 and rx on 7222,  radio goes to 7077 on main for MY RX and
> 7222 on sub for MY TX.
> Then I click on the CT9P spot.
> CT9P tx on 7055 and rx on 7200, radio stays on 7077 on main for MY RX and
> 7200 for MY TX.
> If you keep clicking on the CT9P spot, you can see 7055 pop up between the
> clicks for a split second but will always default back to 7077....so it
> appears to me that everything wants to default to the previous main vfo
> frequency.
>
>
> It just seems as if the main vfo will not move and stay on the second spot
> frequency in these situations.
>
> ----- Original Message -----
> *From:* Bob Wilson, N6TV <n6tv at arrl.net>
> *To:* support at win-test.com
> *Sent:* Sunday, October 26, 2008 8:26 PM
> *Subject:* Re: [WT-support] Splits on 40
>
> So if you turn off split, then start clicking, Win-Test will work fine for
> the rest of the contest, whether you click on split spots or not, right?
>
> The only thing that matters is the state of the radio the *first* time you
> click on a split spot, right?  Split has to be OFF at that time.  From that
> point forward, it all works OK?
>
> 73,
> Bob, N6TV
>
> 2008/10/26 Robert Pack, NX5M <nx5m at txcyber.com>
>
>>  Yes, it works fine as long as split is turned off on the radio.
>> Just cannot click on a spot that has a split IF the radio is already on
>> split.
>>
>> I did note that I can see the correct frequency show up if you keep
>> clicking but it just will not stay there.
>>
>>
>>  ----- Original Message -----
>> *From:* Bob Wilson, N6TV <n6tv at arrl.net>
>> *To:* support at win-test.com
>>  *Sent:* Sunday, October 26, 2008 6:09 PM
>> *Subject:* Re: [WT-support] Splits on 40
>>
>>  Does the problem go away if you turn OFF split, on the radio*, before*clicking on a spot?
>>
>> 2008/10/26 SHANE BRADY <tuffyb1 at verizon.net>
>>
>>>  My Yaesu FT920 did the same thing.  Needs the bug to be fixed.
>>>
>>> WB2WPM
>>>
>>
>>  ------------------------------
>>
>> _______________________________________________
>> Support mailing list
>> Support at win-test.com
>> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>>
>>
>> _______________________________________________
>> Support mailing list
>> Support at win-test.com
>> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>>
>>
>  ------------------------------
>
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>
>
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.win-test.com/pipermail/support/attachments/20081026/44c05c09/attachment.htm>