[WT-support] Swap the frequency on both Radios.
Dani EA5FV
ea5fv at ure.es
Wed Oct 18 02:21:45 CEST 2006
Hello to All!
----- Original Message -----
From: José Nunes CT1BOH
To: support at win-test.com
Sent: Tuesday, October 17, 2006 1:40 PM
Subject: Re: [WT-support] Swap the frequency on both Radios.
Sure it is best to have a short cut key in the key board than to type swap in the callsign field. No doubt about that!
Also sometimes there may be a call in the callsign field and in that situation you would have to wait to log the call or wipe it out, before typing swap.
Dear Jose, I am happy that you are according in this.
But Dani the real soclution for you problem it not the SWAP. The solution is to have two amplifiers, instead of using swap. Swap is better used for other operating situations/scenarios, rather than be a "poor" solution for the lack of the second amplifier.
If I had possibilities to have another amplifier I would not be writing this.
Also the way you want to use the swap, will stress the automatic band change of the amplifier, if you have trouble getting the rare mult. You mau have to call a mult 5/6 or 7 times, will running on the primary radio. A lot of band changing stress to the amp.
Get a second manual cheap amplifer and work mutipliers the way it should be - with the scenarios, not with swap....
As always, their advice are very appreciated, thank you!!!
73
73
José Nunes
CONTEST CT1BOH - http://www.qsl.net/ct1boh
On 10/17/06, Tony EA5BY <ea5by at lynxdxg.com> wrote:
I agree Dani. That should be very nice.
I have some info about WRTC and they did that by typing ctrl-S.
Let's hope WINTEST guys accept your request.
73 de Tony EA5BY
----------------------------------------------------------------------------
De: support-bounces at win-test.com [mailto: support-bounces at win-test.com] En nombre de Dani EA5FV
Enviado el: domingo, 15 de octubre de 2006 23:12
Para: support at win-test.com
Asunto: Re: [WT-support] Swap the frequency on both Radios.
If I write in the field indicative "SWAP", the radios make what I want (Swap the frequency on both radios). But it is I inconvenience to type four letters, serious very good that this operation was but quick, for example CTRL+S.
73 de Dani EA5FV
ea5fv at lynxdxg.com
----- Original Message -----
From: José Nunes CT1BOH
To: support at win-test.com
Sent: Sunday, October 15, 2006 3:29 PM
Subject: Re: [WT-support] Swap the frequency on both Radios.
or type in the callsign field "SWAP"
73
José
CONTEST CT1BOH http://www.qsl.net/ct1boh
On 10/15/06, José Nunes CT1BOH <ct1boh at gmail.com > wrote:
It's already there...
Just push then "*" key in the numbers keypad, far righ end of a keyboard
|Num lock| | / | |*| |-|
or Redefine any key to your liking
73
José
CONTEST CT1BOH http://www.qsl.net/ct1boh
On 10/15/06, Filipe Lopes <ct1ilt at mail.telepac.pt > wrote:
Hi all,
I agree with Dani, a swapping radios with Keybord would be very nice! Much easier!
73's Filipe CT1ILT
----- Original Message -----
From: Dani EA5FV
To: Wintest_reflector
Sent: Sunday, October 15, 2006 2:37 AM
Subject: [WT-support] Swap the frequency on both Radios.
Hello to all,
one of the possibilities that offers the Swap the frequency on both radios, is to be able to work with a single automatic amplifier (for example ACOM 2000A) for two radios. With Wintest and EZMaster this is possible.
The panorama is the following one:
- Radio1 running (high power)
- Radio2 looks for multipliers (low power)
If Radio2 locates a multiplier you try to work him, but if it becomes hard. It is the moment to make
Swap WinTest and EZMaster make all the changes of frequencies and antennas. The amplifier you
it adjusted automatically to the antenna of Radio2, you work the multiplier (now with power), while Radio1 continues calling in low power maintaining busy its frequency (nobody took off it). When you work the multiplier with Radio2, make new Swap and Radio1 it continued in running with high power, you continued looking for multipliers for Radio2.
Now single lack to be able to make Swap the frequency on both radios with the keyboard. WinTest makes the Swap with the mouse going by MENU/COMANDS/SWAP THE FREQUENCY......... much lost of time, serious very good to make it directly from the KEYBOARD, pressing a combination of keys for example Ctrl+S.
73 de Dani EA5FV
ea5fv at lynxdxg.com
--------------------------------------------------------------------
_______________________________________________
Support mailing list
Support at win-test.com
http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
--------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.408 / Virus Database: 268.13.3/474 - Release Date: 13-10-2006
_______________________________________________
Support mailing list
Support at win-test.com
http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
--------------------------------------------------------------------------
_______________________________________________
Support mailing list
Support at win-test.com
http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
_______________________________________________
Support mailing list
Support at win-test.com
http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
------------------------------------------------------------------------------
_______________________________________________
Support mailing list
Support at win-test.com
http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.win-test.com/pipermail/support/attachments/20061018/98f1457a/attachment.htm>
More information about the support
mailing list