[WT-support] Swap the frequency on both Radios.

[José Nunes CT1BOH]

Sure it is best to have a short cut key in the key board than to type swap
in the callsign field. No doubt about that!
Also sometimes there may be a call in the callsign field and in that
situation you would have to wait to log the call or wipe it out, before
typing swap.

But Dani the real soclution for you problem it not the SWAP. The solution is
to have two amplifiers, instead of using swap. Swap is better used for other
operating situations/scenarios, rather than be a "poor" solution for the
lack of the second amplifier.

Also the way you want to use the swap, will stress the automatic band change
of the amplifier, if you have trouble getting the rare mult. You mau have to
call a mult 5/6 or 7 times, will running on the primary radio. A lot of band
changing stress to the amp.

Get a second manual cheap amplifer and work mutipliers the way it should be
- with the scenarios, not with swap....


73
José Nunes
CONTEST CT1BOH - http://www.qsl.net/ct1boh





On 10/17/06, Tony EA5BY <ea5by at lynxdxg.com> wrote:
>
>  I agree Dani. That should be very nice.
> I have some info about WRTC and they did that by typing ctrl-S.
> Let's hope WINTEST guys accept your request.
>
> 73 de Tony EA5BY
>
>  ------------------------------
> *De:* support-bounces at win-test.com [mailto:support-bounces at win-test.com] *En
> nombre de *Dani EA5FV
> *Enviado el:* domingo, 15 de octubre de 2006 23:12
> *Para:* support at win-test.com
> *Asunto:* Re: [WT-support] Swap the frequency on both Radios.
>
>
>  If I write in the field indicative "SWAP", the radios make what I want
> (Swap the frequency on both radios). But it is I inconvenience to type four
> letters, serious very good that this operation was but quick, for example
> CTRL+S.
>
> 73 de Dani EA5FV
> ea5fv at lynxdxg.com
>
> ----- Original Message -----
> *From:* José Nunes CT1BOH <ct1boh at gmail.com>
> *To:* support at win-test.com
> *Sent:* Sunday, October 15, 2006 3:29 PM
> *Subject:* Re: [WT-support] Swap the frequency on both Radios.
>
>
> or type in the callsign field "SWAP"
>
>  73
> José
> CONTEST CT1BOH http://www.qsl.net/ct1boh
>
>
>
> On 10/15/06, José Nunes CT1BOH <ct1boh at gmail.com> wrote:
> >
> > It's already there...
> >
> > Just push then "*" key in the numbers keypad, far righ end of a keyboard
> >
> > |Num lock|    | / |    |*|     |-|
> >
> >
> > or Redefine any key to your liking
> >
> >
> > 73
> > José
> > CONTEST CT1BOH http://www.qsl.net/ct1boh
> >
> >
> >
> > On 10/15/06, Filipe Lopes <ct1ilt at mail.telepac.pt > wrote:
> > >
> > >  Hi all,
> > >
> > > I agree with Dani, a swapping radios with Keybord would be very nice!
> > > Much easier!
> > >
> > > 73's Filipe CT1ILT
> > >
> > >
> > >
> > >  ----- Original Message -----
> > > *From:* Dani EA5FV <ea5fv at ure.es>
> > > *To:* Wintest_reflector <support at win-test.com>
> > > *Sent:* Sunday, October 15, 2006 2:37 AM
> > > *Subject:* [WT-support] Swap the frequency on both Radios.
> > >
> > >
> > > Hello to all,
> > > one of the possibilities that offers the Swap the frequency on both
> > > radios, is to be able to work with a single automatic amplifier (for example
> > > ACOM 2000A) for two radios. With Wintest and EZMaster this is possible.
> > > The panorama is the following one:
> > > - Radio1 running (high power)
> > > - Radio2 looks for multipliers (low power)
> > > If Radio2 locates a multiplier you try to work him, but if it becomes
> > > hard. It is the moment to make
> > > Swap WinTest and EZMaster make all the changes of frequencies and
> > > antennas. The amplifier you
> > > it adjusted automatically to the antenna of Radio2, you work the
> > > multiplier (now with power), while Radio1 continues calling in low power
> > > maintaining busy its frequency (nobody took off it). When you work the
> > > multiplier with Radio2, make new Swap and Radio1 it continued in running
> > > with high power, you continued looking for multipliers for Radio2.
> > > Now single lack to be able to make Swap the frequency on both radios
> > > with the keyboard.  WinTest makes the Swap with the mouse going by
> > > MENU/COMANDS/SWAP THE FREQUENCY......... much lost of time, serious very
> > > good to make it directly from the KEYBOARD, pressing a combination of keys
> > > for example Ctrl+S.
> > > 73 de Dani EA5FV
> > > ea5fv at lynxdxg.com
> > >
> > > ------------------------------
> > >
> > > _______________________________________________
> > > Support mailing list
> > > Support at win-test.com
> > > http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
> > >
> > > ------------------------------
> > >
> > > No virus found in this incoming message.
> > > Checked by AVG Free Edition.
> > > Version: 7.1.408 / Virus Database: 268.13.3/474 - Release Date:
> > > 13-10-2006
> > >
> > >
> > > _______________________________________________
> > > Support mailing list
> > > Support at win-test.com
> > > http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
> > >
> > >
> > >
> >
>  ------------------------------
>
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>
>
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.win-test.com/pipermail/support/attachments/20061017/390a70f5/attachment.htm>