[WT-support] CQ with WT

[Don Beattie]

OK Olivier - look forward to hearing from you.

Also, I wonder if it would be better to have the Alternate CQ stop on 
pressing ANY key, WITHOUT having also to have auto CQ switched on ? One 
mouse click instead of two !

73

Don, G3BJ


----- Original Message ----- 
From: "Olivier F5MZN" <olecam at f5mzn.org>
To: <support at win-test.com>
Sent: Friday, January 27, 2006 7:35 AM
Subject: Re: [WT-support] CQ with WT


> Don Beattie wrote:
>> Olivier/Larry,
>>  I seem to have a problem with the CQ facility on WT. Only tested on CW 
>> so far.
>>  Three scenarios:
>>  a) SO2R, auto CQ (not alternate):  Pressing any key whilst transmitting 
>> does not stop the CQ (this is probably OK) But pressing "Esc" stops the 
>> CQ AND moves WT from Latch mode to "listen both", which is not OK, I 
>> think.
>> b) SO2R Alternate CQ: Pressing any key does NOT stop the CQ (until the 
>> end of that particular CQ). Again hitting Esc will stop the CQ, but 
>> switches the audio as in (a)
>> c) SO2R Alternate CQ, with CQ repeat enabled (should not be necessary in 
>> Alternate CQ mode, I think): Pressing any key stops the CQ - that is OK. 
>> Again pressing Esc moves WT from Latch to listen both.
>
> ESC stops transmitting, and the headphone status should return to the 
> status which was active before sending the message. It appears that it is 
> not the case. I'll investigate! Thanks for the report Don.
>
> 73,
> -- 
> Olivier / f5mzn
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>