[WT-support] iCOM Polling

[f6ify]

Hi,

  WT 2.18.3 radio 1 IC756 (no pbm) radio2 OMNI 6
Here I had the same pbm (pc to OMNI6 only) but I looked in the wt.ini file
and founded an other line with 
IcomGenericRadio2=00h the  "normal" IcomGenericRadio2=04h is also here. So I
remove the line with 00h and now all is ok.
If I declare in the configuration interface my radio as Tentec OMNI VI
nothing works, so I always declare my OMNI6 as IC-Generic. The IC 756 is
declared as IC756 and the control is ok.

I have the same pbm signaled by Fabio about SSB/CW commutation. But It seems
the OMNI 6 start in CW and after half a second commute in SSB, same with the
IC756.
 
Hope this help (and is clear).
--
73 Philippe - F6IFY


> -----Original Message-----
> From: support-bounces at win-test.com 
> [mailto:support-bounces at win-test.com] On Behalf Of Laurent 
> HAAS - F6FVY
> Sent: lundi 11 juillet 2005 15:54
> To: support at win-test.com
> Subject: Re: [WT-support] iCOM Polling
> 
> Hi Matthias
> 
> Matthias Jelen a écrit :
> 
> > I guess it´s the same probleme I had with my TenTec OMNI 
> VI. It should 
> > be compatible to ICOM. I tried to run it both as OMNI VI, IC735 and 
> > IC706 and got always the same result: Direction PC -> radio 
> works, but not vice versa.
> > 
> > The radio was connected directly to the COM - port.
> 
> I think Phil F6IFY also owns a TenTec OMNI VI and use it with 
> Win-Test. 
> Maybe is it only a setting issue...
> 
> In the meantime, if I remember well, and if this setting does 
> exist in your TenTec (?), check that "CI-V Transceive" is ON.
> 
> HTH
> 
> 73
> 
> Larry - F6FVY
> 
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>