[WT-support] Progress and a question or two

[Pete Smith]

Sorry -- don't know what was wrong, but the numeric "*" key is working fine 
now.

73, Pete N4ZR



At 02:21 PM 9/26/2004, you wrote:

>Hi Pete and Oliver
>I used TopTen devices DXD and WT with 2 X FT-990 + 2 X FL-7000 and 2 X 
>microHAM Band Decoder.
>The "*" works well here.
>
>73 Laurent
>F6GOX
>
>Olivier F5MZN a écrit :
>
>>Hi Pete,
>>
>>>Well, I have the program controlling both radios now - a Mark 5 (Radio 
>>>1) and a TS-930/PIEXX (Radio 2).  My radios are both switched and keyed 
>>>by a TopTen DXD controller, which has only one CW output, which it 
>>>switches from one radio to the other under command of the computer.
>>>
>>>I can switch radios fine with the mouse, although the numeric "*" key 
>>>does not seem to work.  It switches the program's focus but does not 
>>>switch the DXD through the LPT port.  When I switch radios with the 
>>>mouse, the DXD switches and the CW goes to the right radio.
>>
>>I don't have any DXD under hand for trying but I checked the operation of 
>>the key * and the output for radio 1/2 on the parallel port seems to work 
>>as expected. Can you verify again, with "radio 1" selected in the LPT1 
>>interface?
>>Thank you,
>_______________________________________________
>Support mailing list
>Support at win-test.com
>http://www.f5mzn.org/cgi-bin/mailman/listinfo/support