Hi all<div dir="auto"><br></div><div dir="auto">During the IARU contest weekend using an HQ version of WT,L and an FT1000MP, I was <span style="font-family:-apple-system,sans-serif">trying to find a way to get an audio WAV file (for CQ) to be output when I hit F1 and was in SSB mode.</span></div><div dir="auto"><br></div><div dir="auto">I didn’t find a way to get it to play successfully over the air. </div><div dir="auto"><br></div><div dir="auto">I tried editing the LUA scripts to run the following sequence:</div><div dir="auto">Key the PTT</div><div dir="auto">Play the audio</div><div dir="auto">Unkey the PTT</div><div dir="auto"><br></div><div dir="auto">I found some online HEX commands to key the PTT and unkey it.</div><div dir="auto">I found online help to play an audio file. </div><div dir="auto">I could not get it to play nicely together, and it would just click on and off again immediately, without playing the audio while PTT was enabled.</div><div dir="auto"><br></div><div dir="auto">The PC audio was patched into the PATCH port in the back of the rig, and the PTT was controlled over a serial port from the PC. </div><div dir="auto"><br></div><div dir="auto">In theory it was doable. In practice in the heat of battle I could not get it to work. </div><div dir="auto"><br></div><div dir="auto">How do i do this, if I were to try again, without using a MicroHam interface? (I have one at home for just such a job from back when I had a 1000MP, I didn’t think to bring it the 100 miles with me to set it up). </div><div dir="auto"><br></div><div dir="auto">Thanks in advance</div><div dir="auto">Mike</div><div dir="auto">G7TWC</div><div dir="auto"><br></div>