<html><head><style type="text/css"><!-- DIV {margin:0px;} --></style></head><body><div style="font-family:tahoma, 'new york', times, serif;font-size:12pt"><div>Hello,</div><div>Sometimes (quite often, really), I want to use 2 different radios in a given contest, but still operate SO1R. In the normal station configuration, all the antennas are switched by a single switch unit, and I have an A/B switch operated by the SO2R box to route the antenna socket of the appropriate radio to the antenna switch unit. What I would therefore like to do is have WT set the band data on the LPT port according to the active radio. So, for example, I may want to use Radio 1 on the higher bands, but Radio 2 on the lower bands. When I press '*' to switch radios, I would like the antenna switch to change too. Is this possible? So far, I have only managed to work out how to set WT to derive band data from R1 OR R2, but this is a 'once only' setting, down in the
menus.</div><div>Please tell me I am missing something glaringly obvious, or failing that, please tell me there is a neat work-around.</div><div>Obviously, when I make an attempt at a contest using SO2R, I re-jig the station so the A/B switch does not operate and route another, extensive (Not! HI!) antenna system to Radio 2 directly. Then, it all works beautifully, it's just in the 'Let's have a play in this contest for a couple of hours' scenario that I have a problem.</div><div>Any ideas would be gratefully received.</div><div><br></div><div>73,</div><div><br></div><div><br></div><div>John,</div><div>G4DRS</div><div style="position:fixed"></div>
</div></body></html>