<div class="gmail_quote">On Fri, Feb 11, 2011 at 4:12 AM, Simon Schelkshorn <span dir="ltr"><<a href="mailto:simon@schelkshorn.de">simon@schelkshorn.de</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin: 0pt 0pt 0pt 0.8ex; border-left: 1px solid rgb(204, 204, 204); padding-left: 1ex;">

<div id=":pq">I was testing with DXPedition and all modes. Yes Ctrl-F1 seems to cycle correctly as the TRX is being switched<br>
to RTTY and also the Mode Indicator in the log shows RTTY for a very short period of time but then is set to<br>
SSB after the status of the TRX has been read back by WT (TRX of course stays in mode RTTY).<br>
<br>
When the log is set to MODE=RTTY only then WT will transmit as expected! </div></blockquote><div><br>Simon,<br><br>First, you have to get the radio's frequency to display correctly in Win-Test.  Be sure to tell the microHAM Router software that you are connecting an FT-990.  In the Router interface, Ports tab, CAT port, click the SET button and select the radio model from the drop-down list.  Make the sure the baud rate matches the radio.<br>

<br>Mode can be calculated from the frequency.  In the microHAM Router software, select Options | Digital Band Map and set the frequency range for RTTY.<br><br>Similarly in Win-Test, select <a href="http://docs.win-test.com/wiki/Menu:Options#Bandplans...">Options | Bandplans</a> and make sure the frequency ranges make sense for RTTY mode.<br>

<br>If you can't get CAT to work at all, send me screen shots of the Win-Test Interface Configuration screen and the Router Ports tab and Radio set-up windows.<br><br>73,<br>Bob, N6TV<br><br><br><br><br></div></div><br>