Glad you solved the problem, but you could provide more details please, in case someone else runs across this?<br><br>Why did it work OK with everything but Win-Test?<br><br>73,<br>Bob, N6TV<br><br><div class="gmail_quote">


On Thu, Nov 18, 2010 at 10:53 AM, Karel Odehnal <span dir="ltr"><<a href="mailto:odehnk@seznam.cz" target="_blank">odehnk@seznam.cz</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin: 0pt 0pt 0pt 0.8ex; border-left: 1px solid rgb(204, 204, 204); padding-left: 1ex;">


Solved Bob!<br>
<br>
There was bad configuration in standalone mode.<br>
<br>
73! Karel OK2ZI<br>
<br>
Bob Wilson napsal(a):<br>
<div>> There is not enough detail to diagnose the apparent configuration problem.<br>
><br>
> It's sounds like the Win-Test PTT line is mixed up with the CW output.<br>
><br>
> If you can't figure it out, please send screen shots of your Win-Test<br>
> SETUP and microHAM ports dialogs.<br>
><br>
> 73,<br>
> Bob, N6TV<br>
><br>
> On Tue, Nov 16, 2010 at 10:46 AM, Karel Odehnal <<a href="mailto:odehnk@seznam.cz" target="_blank">odehnk@seznam.cz</a><br>
</div><div>> <mailto:<a href="mailto:odehnk@seznam.cz" target="_blank">odehnk@seznam.cz</a>>> wrote:<br>
><br>
><br>
>     Hello all,<br>
><br>
>     I have problem with WKUSB keyer (Winkey 2 chip version 22 inside).<br>
>     This keyer can not work under WT. I tested him with N1MM, WKtest<br>
>     and few<br>
>     other SW with success but, not under WT.<br>
><br>
>     (I have also microKeyer II with Winkey 1 version 10 - tested OK, MK2R<br>
>     with Winkey 2 version 21 - tested OK)<br>
><br>
>     I tried to change nearly everything in WT, but without success. WT<br>
>     reads<br>
>     the speed from the pot, keys the radio, but from the paddle is comming<br>
>     only steady tone.<br>
>     The same is going out after F1 pressing.<br>
><br>
>     I am totally lost with this keyer under WT. What is wrong??<br>
><br>
>     Thanks Karel OK2ZI<br>
>     _______________________________________________<br>
>     Support mailing list<br>
</div>>     <a href="mailto:Support@win-test.com" target="_blank">Support@win-test.com</a> <mailto:<a href="mailto:Support@win-test.com" target="_blank">Support@win-test.com</a>><br>
<div>>     <a href="http://www.f5mzn.org/cgi-bin/mailman/listinfo/support" target="_blank">http://www.f5mzn.org/cgi-bin/mailman/listinfo/support</a><br>
><br>
><br>
</div>> ------------------------------------------------------------------------<br>
<div><div></div><div>><br>
> _______________________________________________<br>
> Support mailing list<br>
> <a href="mailto:Support@win-test.com" target="_blank">Support@win-test.com</a><br>
> <a href="http://www.f5mzn.org/cgi-bin/mailman/listinfo/support" target="_blank">http://www.f5mzn.org/cgi-bin/mailman/listinfo/support</a><br>
><br>
<br>
_______________________________________________<br>
Support mailing list<br>
<a href="mailto:Support@win-test.com" target="_blank">Support@win-test.com</a><br>
<a href="http://www.f5mzn.org/cgi-bin/mailman/listinfo/support" target="_blank">http://www.f5mzn.org/cgi-bin/mailman/listinfo/support</a><br>
</div></div></blockquote></div><br>