There is not enough detail to diagnose the apparent configuration problem.<br><br>It's sounds like the Win-Test PTT line is mixed up with the CW output.<br><br>If you can't figure it out, please send screen shots of your Win-Test SETUP and microHAM ports dialogs.<br>

<br>73,<br>Bob, N6TV<br><br><div class="gmail_quote">On Tue, Nov 16, 2010 at 10:46 AM, Karel Odehnal <span dir="ltr"><<a href="mailto:odehnk@seznam.cz">odehnk@seznam.cz</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin: 0pt 0pt 0pt 0.8ex; border-left: 1px solid rgb(204, 204, 204); padding-left: 1ex;">

<br>
Hello all,<br>
<br>
I have problem with WKUSB keyer (Winkey 2 chip version 22 inside).<br>
This keyer can not work under WT. I tested him with N1MM, WKtest and few<br>
other SW with success but, not under WT.<br>
<br>
(I have also microKeyer II with Winkey 1 version 10 - tested OK, MK2R<br>
with Winkey 2 version 21 - tested OK)<br>
<br>
I tried to change nearly everything in WT, but without success. WT reads<br>
the speed from the pot, keys the radio, but from the paddle is comming<br>
only steady tone.<br>
The same is going out after F1 pressing.<br>
<br>
I am totally lost with this keyer under WT. What is wrong??<br>
<br>
Thanks Karel OK2ZI<br>
_______________________________________________<br>
Support mailing list<br>
<a href="mailto:Support@win-test.com">Support@win-test.com</a><br>
<a href="http://www.f5mzn.org/cgi-bin/mailman/listinfo/support" target="_blank">http://www.f5mzn.org/cgi-bin/mailman/listinfo/support</a><br>
</blockquote></div><br>