<div class="gmail_quote">On Thu, Oct 21, 2010 at 12:26 PM, Mario Lorenz <span dir="ltr"><<a href="mailto:ml-wt@vdazone.org">ml-wt@vdazone.org</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin: 0pt 0pt 0pt 0.8ex; border-left: 1px solid rgb(204, 204, 204); padding-left: 1ex;">

<div id=":25">but on my K3, I use the control lines<br>
on the same port for keying and CWing. There wouldnt be a chance of<br>
routing those through OmniRig too?</div></blockquote><div><br>Probably not.  You can't tell Win-test to send CW on the DTR line of the Radio's COM port when using OmniRig, because that means Win-Test will have to grab the COM port for exclusive use, and that will block OmniRig from using the port.<br>

<br>However, you <i>can </i>fix it with hardware solution, just hard wire the DTR line of <i>another</i> COM port, or an LPT port, to the K3's RS-232 connector (two cables combined in one connector, a custom Y-adapter).  One COM port does radio control via OmniRig, a second COM/LPTport does CW keying.<br>

<br>Or, if you have a microHAM box, you can assign two COM ports to the radio and use one for OmniRig and the other for COM port CW.<br><br>CW keying via a single radio COM port DTR line works fine if you tell it Radio 1 is Elecraft, but not OmniRig.<br>

<br>73,<br>Bob, N6TV<br></div></div>