Peter,<br><br>First, having a rotator control box that plugs directly into a LAN as an Ethernet appliance sounds like a great idea; this would greatly simplify station integration <i>if</i> there were a standard protocol, such as the Win-Test UDP protocol, that all manufacturers could implement.<br>

<br>As you may have already discovered, the UDP protocol used by Win-Test is documented here:<br><br><a href="http://download.win-test.com/utils/SummaryBroadcastingSpecs.txt">http://download.win-test.com/utils/SummaryBroadcastingSpecs.txt</a><br>

<br>Unfortunately, that document is over 2 years old, and it describes protocol version 1.2 (current version is 1.25).  It does <i>not</i> describe the relatively new rotator frames, which were added in Summer of 2009, about a year after that document was published.<br>

<br>I think the current protocol document is available to software authors upon request.  It would be nice if it were published as an open standard that all rotator manufacturers could adopt.<br><br>In the mean time, adopting an existing published RS-232 command set would be your best bet, even if you don't have any serial ports on your computer.<br>

<br>You could use an Ethernet-to-RS232 device like this one to send commands to your controller over Ethernet:<br><br><a href="http://www.hw-group.com/products/converter/index_en.html">http://www.hw-group.com/products/converter/index_en.html</a><br>

<br>If anyone on this list ever tried using something like this Portbox Ethernet-to-RS232 box, please describe the results.  Note that this is ETHERNET, not USB.<br><br>73,<br>Bob, N6TV<br><br><div class="gmail_quote">On Thu, Oct 7, 2010 at 1:51 AM, Peter Stuge <span dir="ltr"><<a href="mailto:peter@stuge.se">peter@stuge.se</a>></span> wrote:<br>

<blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">Hello!<br>
<br>
I'm a member of SSRS in southern Sweden, I'm not yet equipped with a<br>
callsign, but an amateur at heart for many years already. We expect<br>
to see some activity this weekend :) so it would be nice if I could<br>
get this thing to work.<br>
<br>
I've made my own controller for our Yaesu antenna rotor since we<br>
don't have a GS-232. I would of course like to hook the controller<br>
into Win-Test, but even though it would allow me to use wtRotators<br>
as-is, I am not at all interested in emulating the GS-232 serial<br>
protocol.<br>
<br>
It would be significantly easier, faster and simpler for me if I<br>
could use another protocol for the controller, and had the<br>
information needed to write a small program that looks like, and<br>
speaks like, wtRotators. We are not using wtRotators at all at the<br>
moment, so there's no risk for conflicts.<br>
<br>
In the longer term maybe wtRotators would gain support for my<br>
controller directly, that would be ideal, but right now my focus is<br>
on the coming contest and I can certainly whip something up quickly<br>
enough as long as I know what the UDP messages should look like.<br>
<br>
Can someone help me? The wiki has a lot of great information, but<br>
very little at the level of detail I need to do this. I hope someone<br>
can fill the gap. It seems that PstRotator and maybe also others<br>
speak this protocol too.<br>
<br>
<br>
Thanks<br>
<br>
//Peter<br>
_______________________________________________<br>
Support mailing list<br>
<a href="mailto:Support@win-test.com">Support@win-test.com</a><br>
<a href="http://www.f5mzn.org/cgi-bin/mailman/listinfo/support" target="_blank">http://www.f5mzn.org/cgi-bin/mailman/listinfo/support</a><br>
</blockquote></div><br>