Also make sure "Source" is not set to MONO under the MISC tab of MMTTY setup (bad example, <a href="http://docs.win-test.com/wiki/BestPractice1#MMTTY">here</a>).<br><br><div class="gmail_quote">On Fri, Sep 24, 2010 at 4:37 PM, Bob Wilson, N6TV <span dir="ltr"><<a href="mailto:n6tv@arrl.net">n6tv@arrl.net</a>></span> wrote:<br>

<blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">Filipe,<br><br>I don't have enough information, so I can only guess.<br><br>Make sure the stereo T-adapter is plugged all the way in to the LINE IN jack of the sound card, not MIC. IN.  It is easy to mix them up.  <br>


<br>Make sure there is no RFI when you connect the common grounds between both
Radio 1 and Radio 2 through the T connector. If you are using Elecraft
K3, use the LINE OUT jacks not the headphone jacks.  Only use the left (VFO A) channel from each radio.  Ignore VFO B / Sub Rx (right channel).  Turn down the RTTY monitor sidetone in the radio so that when radio 1 transmits, very little audio leaks through to radio 2.<br>


<br>Connect a heavy
braid (coax shield) directly between both radio's ground posts so that
any RF stays away from the audio line shield as much as possible.<br>
<br>Use FSK instead of AFSK.  Make sure the station Mic. is MUTED.<br><br>Make sure you are starting TWO copies of MMTTY in separate directories.  Each copy of MMTTY must be installed in a <i>separate</i> directory, e.g. Radio1 uses C:\Program Files\MMTTY\MMTTY.EXE and Radio2 uses C:\Program Fiels\MMTTY2\MMTTY.EXE.  See <a href="http://docs.win-test.com/wiki/Menu:Options#RTTY_configuration..." target="_blank">this link</a> for an example.  MMTTY 1 should monitor LEFT channel and MMTTY 2 should monitor RIGHT channel.<br>


<br>Make sure you are not using any of the Advanced SO2R Scenarios that mix up the audio from both radios using $R1R2 etc.<br><br>Are you using MK2R+?<br><br>If you still can't figure it out, I would have to see all the screen shots or you would have to install CrossLoop and a broadband connection for debugging the setup remotely.<br>


<br>73,<br><font color="#888888">Bob, N6TV</font><div><div></div><div class="h5"><br><br><div class="gmail_quote">On Fri, Sep 24, 2010 at 4:06 PM,  <span dir="ltr"><<a href="mailto:ct1ilt@sapo.pt" target="_blank">ct1ilt@sapo.pt</a>></span> wrote:<br>

<blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
Hi guys,<br>
<br>
I am trying to setup eveything for WW RTTY to operate SO2R but I am<br>
having an audio issue.<br>
<br>
I have audio from radio 1 into an RCA plug and audio from radio 2 into<br>
another RCA plug then I use a T from 2xRCA to Jack so I have 1 sign to<br>
tip of jack and the other signal to next contact of Jack plug.<br>
<br>
My problem is after TXing for example on Radio 1 the audio will be<br>
mixed up and appear on Both MMTTY windows or one will be with overflow<br>
signal and the other almost no signal.<br>
<br>
I have the Jack plug into LINE-IN port of my sound card SB LIVE 1400!<br>
<br>
I have chosen Left channel for RADIO A and right channel for RADIO B<br>
in MMTTY configs.<br>
<br>
<br>
any idea how to fix this so I have the proper audio on each MMTTY scope?<br>
<br>
Thank you<br>
<br>
Filipe CT1ILT aka CR6K<br>
_______________________________________________<br>
Support mailing list<br>
<a href="mailto:Support@win-test.com" target="_blank">Support@win-test.com</a><br>
<a href="http://www.f5mzn.org/cgi-bin/mailman/listinfo/support" target="_blank">http://www.f5mzn.org/cgi-bin/mailman/listinfo/support</a><br>
</blockquote></div><br>
</div></div></blockquote></div><br>