Sometimes with microHAM control protocol you have to hit SETUP [Enter] [Enter] a few times to get everything working properly. Every time you exit the Win-Test Interface Configuration screen by press [OK] (or [Enter]), it reinitializes all devices.<br>
<br>I'd also recommend trying WT-Dev 4.6.0 as I thought I saw a note that Laurent had done some work on the microHAM initialization strings to make things work better.<br><br>When you left click once on the green USB icon, what devices do you see listed there? The microHAM box is not "ejectable," so it should not be listed. Do you have a flash drive plugged in to your PC? Are you trying to record audio files or Win-Test files on the flash drive? It may not be fast enough, especially if it isn't being recognized as a USB 2.0 device.<br>
<br>73,<br>Bob, N6TV<br><br><div class="gmail_quote">On Fri, Sep 10, 2010 at 9:27 PM, Christian Janssen <span dir="ltr"><<a href="mailto:chris@dl1mgb.com">chris@dl1mgb.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
Hi Bob,<br>
<br>
I use the microham DVK and the WT DVK is disabled. For PTT I use also<br>
the microham Control (I guess it is automatically done in WT when<br>
setting the COMx to microham control).<br>
<br>
Sorry I can't you deliver screenshots now.<br>
<br>
When I recorded the message I hit ESC just after stopping my voice.<br>
<br>
In the router I configured COM5 to CAT and COM7 to Control. In WT I<br>
configured COM5 to Radio1 and COM7 to microHAM MK/MKII with default<br>
settings. Besides that only Ethernet is configured. All other options in<br>
Interfaces configuration are turned off.<br>
<br>
I also set in WT (MK/MKII/MK2R properties): Enable the MK/MKII/MK2R<br>
integrated DVK.<br>
<br>
With USB symbol I mean this one:<br>
<a href="http://www.pcgames.de/community/common/attached/2010/6/nikiburstr8x/hardware%20sicher%20entfernen.jpg" target="_blank">http://www.pcgames.de/community/common/attached/2010/6/nikiburstr8x/hardware%20sicher%20entfernen.jpg</a><br>
<br>
What happens when I transmit F1: In the router (ports tab): When sending<br>
the voice everything is normal. When the voice hangs up there is just<br>
the PTT keeping the TRX on TX and the red light near the CAT setting is<br>
OFF (only green os on). When going back to RX both lights are on again.<br>
<br>
What I tried now is to use the WT DVK. Let's see how it will work. The<br>
MKII DVK seems to be not properly set or doesn't work at all now. I even<br>
had a blue screen when testing it.<br>
<br>
73s Chris DL1MGB<br>
<br>
<br>
<br>
Am 11.09.2010 06:01, schrieb Bob Wilson, N6TV:<br>
<div class="im">> Chris,<br>
><br>
> It sounds like you are using the Win-Test sound card DVK, is that<br>
> right? Which Sound Card did you specify to Win-Test, the one in your<br>
> computer or the microHAM CODEC? There are two ways to use the MKII's<br>
> sound card: as a Win-Test "internal DVK" sound card (record via<br>
> Shift-F1), or as an "external microHAM DVK" (record via the DVK tab in<br>
> the Router software). You cannot use both at the same time.<br>
><br>
> It also sounds like when you recorded the message via Shift-F1, you<br>
> didn't hit Escape fast enough at the end of the message to terminate it<br>
> with no "dead air time."<br>
><br>
> What are you using for PTT? COM port, microHAM control protocol? Both?<br>
><br>
> I really need to see a screen shot of everything you set-up in the<br>
> Router and Win-Test to figure out what's going on. What happens on the<br>
> Ports tab when you transmit?<br>
><br>
> I don't know what you mean by "The USB Symbol in the Windows bar". Do<br>
> you mean the microHAM router icon in the Windows task bar?<br>
><br>
> 73,<br>
> Bob, N6TV<br>
><br>
> On Fri, Sep 10, 2010 at 8:13 PM, Christian Janssen <<a href="mailto:chris@dl1mgb.com">chris@dl1mgb.com</a><br>
</div><div class="im">> <mailto:<a href="mailto:chris@dl1mgb.com">chris@dl1mgb.com</a>>> wrote:<br>
><br>
> Hi,<br>
><br>
> I wonder if anyone experienced something similar. Following setup:<br>
><br>
> K3<br>
> MKII (with RFI mod and already some ferrites in the USB line)<br>
> Router 7.7.1 (just downloaded the latest version)<br>
> WT 4.5.1<br>
> HP Compaq 615 / Windows XP Professional<br>
><br>
> I recorded the SSB message (CQ) with Shift-F1. When I press F1 some<br>
> words were played and after that nothing more (just PTT). During this<br>
> time the USB symbol in the Windows bar on the bottom left disappears and<br>
> comes back when TRX is going on RX. This is also true for low power (10<br>
> Watts). It doesn't matter if the contest recorder is on or off. Also it<br>
> happens when the external keyboard/mouse is unplugged. When the contest<br>
> recorder was activated the VU meter hangs up after the unsuccessful<br>
> message replayand you have to Ctrl-Alt-Del WT.<br>
><br>
> Any ideas?<br>
><br>
> 73s Chris DL1MGB<br>
><br>
><br>
</div><div><div></div><div class="h5">_______________________________________________<br>
Support mailing list<br>
<a href="mailto:Support@win-test.com">Support@win-test.com</a><br>
<a href="http://www.f5mzn.org/cgi-bin/mailman/listinfo/support" target="_blank">http://www.f5mzn.org/cgi-bin/mailman/listinfo/support</a><br>
</div></div></blockquote></div><br>