<div class="gmail_quote">On Thu, Jul 15, 2010 at 5:07 AM,  <span dir="ltr"><<a href="mailto:sm5ajv@qrq.se">sm5ajv@qrq.se</a>></span> wrote:<br><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">

I think there are still a few issues in the protocol implementation for<br>
the microHam protocol. I really hope this will be solved soon.</blockquote><div style=""><br>That may be the case, but without seeing your screen shots we can't rule out a configuration issue.  Just send them to me privately as this reflector has a limit on attachments of 4K bytes max or something.<br>

<br>K8DD was using COM8 for both the microHAM control protocol and PTT for both radios, which is not a good idea.<br><br>Since you are using Classic Auto Control via COM port pins, you can disable the microHAM control protocol completely, and the delays should disappear.  In other words, don't tell Win-Test that you are using a u2R at all.  Leave the microHAM control port <i>unchecked</i>.  With classic auto control switching should be instantaneous.<br>

<br>In the Router software you should check "Steer WinKey CW/PTT" and uncheck "Steer serial CW/PTT".  It is only required for software that doesn't support two radios.  You should use your microHAM u2R WinKey rather than serial CW as it is can be interrupted by pressing the paddles, and it off-loads the CW timing issues to the WinKey hardware.<br>

<br></div><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">I also think some of the set-ups are in WinTest are rather confusing.<br>
For instance when you are using the WinKeyer built into a microHam product<br>
the WinKeyer setup dialog says it should not be used. But is it really so?<br></blockquote><div><br>It doesn't say that, it just says that whatever you specify in the left side of the dialog (such as CT-style spacing) will be overridden by similar settings in the microHAM Router program.<br>

<br>See <a href="http://docs.win-test.com/wiki/Menu:Options#WinKey_configuration...">this link</a> in the Wiki.<br><br>Set the PTT lead and tail to 0 ms; if your CW VOX and TX Relay timing is working properly, you don't need them.  If the first letter of your callsign is being clipped and people respond to your calls as IM5AJV, then you do.<br>

<br>In sum, I don't think the microHAM control protocol has ever worked well with Win-Test for SO2R switching, so use serial or parallel ports pins instead (Classic Auto Control) as defined via the microHAM Router's SO2R tab and the Win-Test Interfaces Configuration dialog.<br>

<br>73,<br>Bob, N6TV<br></div></div><br>