I have had the same problems - I do not have a good answer, but some things have worked for me.<br> <br>I also get a 1 - 2 second delay sending CW ----- sometimes. And sometimes it degrades to<br>the point that you press an F-key and it will send either the first letter or part of <br>
the first letter in the CW message. Sometimes with a delay and sometimes not.<br>I can see delays from Control to Winkeyer2 when it is happening.<br>And I've watched Mon for both and also see it there.<br>Once it starts it seems there is nothing you can do to fix it short of one of the following:<br>
<ul><li> Exit WT and Router and Restart - sometimes it fixes it, sometimes not.</li><li> Exit WT and Router and Shutdown - sometimes it fixes it, sometimes not.</li><li> Exit WT, Router. Turn off the router and Restart - sometimes it fixes it, sometimes not.</li>
<li> Exit WT, Router. Turn off the router and Shutdown (this has fixed it most times)</li><li> <br></li></ul>There have been times that none of these work, so I go to that 'other' logging program and import the WT's ADIF and proceed with whatever contest it is and everything works fine.<br>
<br>In the June VHF contest I noticed the delay on SSB playing the voice messages .... but it was SSB, so I didn't much care, but there was no delay if I would go to the Router DVK tab and click on the voice message that was recorded there. Just a delay on recordings made by WT.<br>
<br>Is it a WT problem? Is it a Router H/W or S/W problem? I don't know, but the problem goes away if you make Control = none. Every time .... but you lose SO2R control from WT.<br><br>One suggestion I had was to use LPT control - I have a parallel port on the shack PC but it's a bulky cable compared to the USB cable but I have not tried it yet.<br>
<br>TSR's and other utilities do not make a difference - I have an external Creative Sound Blaster and Microsoft Security Essentials running and not much else ...... but the problem did occur before the external sound and MS Security were running on the shack PC.<br>
<br>PC - Dell GTX 2GHz,1MB RAM<br>Router 7.6.1<br>WinTest 4.5.1 13 Jul 2010 0405<br><br>Both WT, MM & WL are set up to agree with the settings in the Router (I learned this the hard way, with help from Bob N6TV!)<br>
Radio 1 - K3 COM1 Real COM port 38400 8 N 1<br>
Radio 2 - K2 COM4 FTDI USB cable 4800 8 N 2<br><br>Winkeyer2 - COM5 1200 8 N 2<br>Control - COM8 115200 8 N 1 PTT Pin 7 (RTS)<br><br>When it works with WT it is the greatest thing since sliced bread and soft butter ..... but on more than one occasion it caused me to go back to my archaic homebrew audio switch box and the WinkeyerUSB!<br>
<br>73 Hank K8DD<br><br>On Wed, Jul 14, 2010 at 5:22 PM, <<a href="mailto:sm5ajv@qrq.se">sm5ajv@qrq.se</a>> wrote:<br>> I still have some issues with microHam u2R and WinTest.<br>><br>> If I configure u2R for SO2R:Classic Control and having serial CW and PTT.<br>
> The SO2R switching works and CW OK. But if I use microHam control protocol<br>> on COM port for SO2R control the SECOND radio CW messages are delayed<br>> about 1-2 seconds. When sending CW messages to Primary Radio there is<br>
> no delay.<br>><br>> Is there anyone out there who has got u2R working OK with WT<br>> and can give some advices?<br>><br>><br>> SW/HW:<br>> WinTest 4.5.0<br>> u2R v1.2<br>> USB Router 7.7.0<br>
> PC Win XP SP3, Celeron 2GHz, 1.25 GB RAM<br>> ST-Lab USB-Serial dongle (2 serial ports)<br>> R1: FT1000MP<br>> R2: TS-450<br>><br>> 73<br>> Ingo SM5AJV / SE5E<br>><br>><br>> _______________________________________________<br>
> Support mailing list<br>> <a href="mailto:Support@win-test.com">Support@win-test.com</a><br>> <a href="http://www.f5mzn.org/cgi-bin/mailman/listinfo/support">http://www.f5mzn.org/cgi-bin/mailman/listinfo/support</a><br>
><br><br><br><br>-- <br>"I knew that God put me on this earth to be on the radio." Ed Bradley<br><br>"Me too!" K8DD<br>-<br><br>