<div class="gmail_quote">On Fri, Dec 4, 2009 at 10:19 PM, Patrick Egloff <span dir="ltr"><<a href="mailto:pegloff@gmail.com">pegloff@gmail.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex;">

<div>During last CW CQWW, i used the microHAM micro KEYER II with WT for the first time.</div><div><br></div><div>I notice a strange behaviour when pressing the footswitch which is connected to the micro keyer (not directly to the trcvr). The CW messages are interrupted, some CW characters are lost.</div>



<div><br></div><div>Is this relative to the micro keyer or WT ?</div></blockquote><div><br></div><div>The microKeyer.  This has nothing to do with Win-Test.</div><div><br></div><div>See the "Footswitch sequencer" settings in the microHAM Router program, under the PTT tab.</div>

<div><br></div><div>According to page 33 of the microKeyer manual:</div><div><br></div><div><blockquote class="webkit-indent-blockquote" style="margin: 0 0 0 40px; border: none; padding: 0px;"><div>"Mute serial CW - if checked, serial CW will be muted while the footswitch is pressed. If Restore serial CW is checked, CW will resume when the footswitch is released (if it has not already ended)."</div>

<div><br></div></blockquote>"Serial CW" means CW originating on the serial interface, such as that coming from Win-Test when you press a message button.</div><div><br></div><div>73,</div><div>Bob, N6TV</div></div>