First, I assume you were using Win-Test 4.2.0 (there is no version "4.02").<br><br>Yes, some people have reported problems with Win-Test not obtaining a radio's frequency properly, even though setting a frequency works OK.  In the specific case I know of, the user was using an IC-746Pro with a combination of USB-to-Serial and Serial to CI-V cables to the radio.  This combination simply did not work (and DTR=Always On was required to make anything work, because it supplied power to the CI-V cable).<br>

<br>What hardware interface are you using between your PC and your radios?  microHAM?  USB-to-Serial converters?  What brand?  What is the version of the device driver and/or Router program?  What version of Windows are you using?<br>

<br>What COM port settings are you using for both radios (baud rate, stop bits)?  What do you use for DTR and RTS?<br><br>I guess it's possible that Win-Test 4 has a timing issue or memory leak, and under certain circumstances, it will stop reading frequency data from the radios.  But it's also possible that this is a device driver issue and there's nothing the Win-Test developers can do about it.  Can you replicate the problem using Win-Test 3.27.1 or earlier with the same hardware?<br>

<br>73,<br>Bob, N6TV<br><br><div class="gmail_quote">On Tue, Oct 27, 2009 at 4:45 AM, Pablo - EA4TX <span dir="ltr"><<a href="mailto:ea4tx@ea4tx.com">ea4tx@ea4tx.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">

Hi,<br>
<br>
During this last CQ WW we have used WT V4.02 in our EE2W M/M station.<br>
<br>
On two computers, we have noticed several times during the contest, that WT<br>
detected an incorrect frecuency readout from the radio. One computer was<br>
connected to a K3 and the other one to a FT1000MP. To solve it, it was so<br>
easy as go into the "Configure Interface" menu, and later press OK.<br>
Inmediately, it began to work again.... During a time...<br>
<br>
The operator of that FT1000MP detected during that failure, that when he<br>
pressed to the Band Map for a QSY to the Spotted announcement, it worked so<br>
it seems that the WT had a RX problem from the CAT, but the TX to the<br>
transceiver was working Ok.<br>
<br>
Does anyone detected a similar problem?<br>
<br>
73's Pablo - EA4TX<br>
</blockquote></div><br>