The VFO A setting for Radio 1 should smoothly follow the frequency of VFO A on the radio.<br><br>Check your Radio's menu:<br><br>Item #36 (CI-V Baud Rate) set to Auto (default).  Try this instead of 19200.<br>Item #37 (CI-V Address) set to 66h (default)<br>

Item #38 (CI-V Transceive) must be set to ON (default)<br>Item #39 (CI-V 731 Mode) must be set to OFF (default)<br><br>Push the [V/M] button to make sure you are in VFO mode, not memory mode.<br>Push the [A/B] button to make sure that "VFO A" appears.<br>

<br>In Win-Test SETUP make sure "Use CI-V Transceive" is checked.<br><br>Do you have a CT-17 level converter between the USB-to-Serial adapter and the CI-V jack on the radio, or are you using some other type of level converter?<br>

<br>73,<br>Bob, N6TV<br><br><div class="gmail_quote">On Thu, Oct 22, 2009 at 9:44 AM, Neil Shapiro <span dir="ltr"><<a href="mailto:neil@neilshapiro.com">neil@neilshapiro.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">

But it doesn't seem to receive. Bob's suggestion of typing a frequency<br>
seemed to get the thing working in at least one direction. I can now<br>
type a frequency and the 746Pro will change to that frequency. But If<br>
I change the frequency on the 746Pro the VFO setting in the Radio 1<br>
window does not reflect that change, Weird thing now is I can get this<br>
send-only to work in a few settings. Right now it is DTR ON, RTS OFF,<br>
19,200, 8-N-1, CI-V ON, AUTO Poll. But it also seemed to work with<br>
both DTR and CTS ON. Maybe, bearing in mind I have had this program<br>
less than 24 hours, I just don't understand what it is supposed to do???</blockquote></div><br>